Double glow plasma carburization on zirconium to improve surface hardness and wear resistance
Authors:
- 6 June 2016
- journal article
- research article
- Published by Wiley in Rare Metals
- Vol. 36 (7) , 569-573
Abstract
Though some important progress in the excellent mechanical properties of zirconium alloys have been reported, their high surface hardness and good wear properties need to be explored further. In this work, a carburized layer was formed on the surface of commercially pure zirconium by a double glow plasma hydrogen‐free carburizing technique. Commercial high‐purity graphite was used as the carbon source material. X‐ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS), Vickers hardness test, friction and wear test were used to characterize the samples carburized. The carburized layer could be clearly observed under a microscope. XRD patterns indicate that the zirconium carbide phase is formed in the carburized layer. The surface hardness of the sample increases significantly after carburization. Friction and wear tests results show that wear resistance and friction coefficient of zirconium are improved considerably after carburization. Surface plastic deformation is arrested to a low extent in contrast with pure zirconium because of the presence of ZrC phases during the wear test. The results may provide new insight into methods for surface strengthening of zirconium alloys.Keywords
Funding Information
- National Key Research and Development Program of China (2013CB733000)
- The National Basic Research Program of China (2013CB733000)
- National Nature Science Foundation of China (51271161)
- National Nature Science Foundation of China (51271162)
- National Nature Science Foundation of China (51434008)
This publication has 23 references indexed in Scilit:
- Microstructure and wear‐resistant properties of NiCr–Cr 3 C 2 coating with Ni45 transition layer produced by laser claddingRare Metals, 2015
- Influence of beryllium addition on the microstructural evolution and mechanical properties of Zr alloysMaterials & Design (1980-2015), 2015
- Pack carburisation of commercially pure titanium with limited oxygen diffusion for improved tribological propertiesSurface and Coatings Technology, 2014
- Enhanced wear resistance of NiTi alloy by surface modification with Nb ion implantationRare Metals, 2014
- Hydride-induced degradation of hoop ductility in textured zirconium-alloy tubes: A theoretical analysisActa Materialia, 2012
- Structural evolution and mechanical properties of Zr–45Ti–5Al–3V alloy by heat treatmentsMaterials Science and Engineering: A, 2012
- Microstructure and mechanical properties of hot-rolled ZrTiAlV alloysMaterials Science and Engineering: A, 2012
- The first step for delayed hydride cracking in zirconium alloysJournal of Nuclear Materials, 2010
- Effect of the hydrogen contents on the circumferential mechanical properties of zirconium alloy claddingsJournal of Alloys and Compounds, 2007
- Double glow plasma surface alloying and plasma nitridingSurface and Coatings Technology, 2007