Editors’ Choice—Respirometric in Situ Methods for Real-Time Monitoring of Corrosion Rates: Part I. Atmospheric Corrosion
Authors:
- M. BrunsMBM. Bruns
- S. VirtanenSVS. Virtanen
Open Access
- 2 January 2020
- journal article
- research article
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 167 (2) , 021510
Abstract
A novel respirometric approach to monitor atmospheric corrosion kinetics is presented. Simultaneous real-time monitoring of the H2 evolution reaction (HER) and the O2 reduction reaction (ORR) is possible with a combination of optical O2 sensor measurements with gravimetric volume sensitive techniques or pressure sensor based techniques in closed chambers. The respirometric method is a universal, non-destructive tool applicable to any metal or alloy. It shows a high sensitivity for low corrosion rates and has a high time-resolution. Different examples of relevant engineering metals and alloys will be provided. Mass loss validation measurements carried out at the end of exposure show a good correlation with the total recorded cathodic charge. For metals with different oxidation states the average valency in the corrosion products can be calculated from the cathodic charge together with mass loss. The versatility of the novel monitoring technique is further demonstrated by studying the influence of wet-dry cycling, temperature steps or changes in the gas composition in situ. The rate of HER, ORR and total corrosion rate during these changing exposure conditions can be tracked directly on the same sample. Overall the new method contributes to bridging the gap between lab tests, accelerated testing and field exposure.Keywords
All Related Versions
Funding Information
- Audi AG
This publication has 37 references indexed in Scilit:
- A High-Throughput Test Methodology for Atmospheric Corrosion StudiesElectrochemical and Solid-State Letters, 2011
- Galvanic Corrosion of a Zn/steel Couple in Aqueous NaClISIJ International, 2011
- Corrosion Kinetics Studies of AISI 1020 Carbon Steel from Dissolved Oxygen Consumption Measurements in Aqueous Sodium Chloride SolutionsCorrosion, 2007
- Influence of Electrolyte Layer Thickness and pH on the Initial Stage of the Atmospheric Corrosion of IronJournal of the Electrochemical Society, 1997
- On the atmospheric corrosion of metals which are covered with thin electrolyte layers-iii. the measurement of polarisation curves on metal surfaces which are covered by thin electrolyte layersCorrosion Science, 1990
- On the atmospheric corrosion of metals which are covered with thin electrolyte layers—I. Verification of the experimental techniqueCorrosion Science, 1990
- On the Mechanism of Localized Corrosion of Iron and Stainless SteelJournal of the Electrochemical Society, 1972
- Untersuchungen über den Lochfraß an passiven austenitischen Chrom‐Nickel‐Stählen in neutralen ChloridlösungenMaterials and Corrosion, 1969
- Periodic Variation of Exchange Current Density of Hydrogen Electrode Reaction with Atomic Number and Reaction MechanismJournal of the Electrochemical Society, 1966
- Relative humidity-temperature relationships of some saturated salt solutions in the temperature range 0 degree to 50 degrees CJournal of Research of the National Bureau of Standards, 1954