A 28GHz SiGe BiCMOS phase invariant VGA
Authors:
- 1 May 2016
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 150-153
Abstract
The paper describes a technique to design a phase invariant variable gain amplifier (VGA). Variable gain is achieved by varying the bias current in a BJT, while the phase variation is minimized by designing a local feedback network such that the applied base to emitter voltage has a bias-dependent phase variation which compensates the inherent phase variation of the transconductance. Two differential 28GHz VGA variants based on these principles achieve <;5° phase variation over 8dB and 18dB of gain control range, respectively, with phase invariance maintained over PVT. Implemented in GF 8HP BiCMOS technology, the VGAs achieve 18dB nominal gain, 4GHz bandwidth, and IP1dB > -13dBm while consuming 35mW.Keywords
This publication has 7 references indexed in Scilit:
- 60-GHz 5-bit Phase Shifter With Integrated VGA Phase-Error CompensationIEEE Transactions on Microwave Theory and Techniques, 2013
- A 28-Gb/s 4-Tap FFE/15-Tap DFE Serial Link Transceiver in 32-nm SOI CMOS TechnologyIEEE Journal of Solid-State Circuits, 2012
- 60-GHz Four-Element Phased-Array Transmit/Receive System-in-Package Using Phase Compensation Techniques in 65-nm Flip-Chip CMOS ProcessIEEE Transactions on Microwave Theory and Techniques, 2012
- Analysis and reduction of phase variations of variable gain amplifiers verified by CMOS implementation at C-bandIET Circuits, Devices & Systems, 2010
- Analysis and Compensation of Phase Variations Versus Gain in Amplifiers Verified by SiGe HBT Cascode RFICIEEE Transactions on Microwave Theory and Techniques, 2009
- A Calibrated Phase and Amplitude Control System for a 1.9 GHz Phased-Array Transmitter ElementIEEE Transactions on Circuits and Systems I: Regular Papers, 2009
- Low-Cost BiCMOS Variable Gain LNA at>tex<$Ku$>/tex<-Band With Ultra-Low Power ConsumptionIEEE Transactions on Microwave Theory and Techniques, 2004