Improved Performance of VOx‐Coated Li‐Rich NMC Electrodes
- 27 July 2015
- journal article
- research article
- Published by Wiley in ChemElectroChem
- Vol. 2 (11) , 1768-1773
Abstract
A VOx coating of Li1.2Mn0.56Ni0.16Co0.08O2, made through a low‐temperature annealing process (350 °C), results in the formation of a protecting layer, which enables electrodes to be prepared with an aqueous binder, offering a significantly improved electrochemical performance. The comparison with uncoated electrodes demonstrates the significantly improved performance of VOx‐coated Li1.2Mn0.56Ni0.16Co0.08O2, which substantially outperforms the uncoated material by 30 mAh g−1 at moderate rates. The VOx coating is found to prevent the contact of Li1.2Mn0.56Ni0.16Co0.08O2 with water from the aqueous‐binder processing, preventing leaching of metal cations. Upon cell operation, the coating delays the transformation of the active layer material into the spinel phase, occurring at low voltages, thus delaying its typical capacity fade upon cycling. Finally, the coating contributes to the overall material capacity, while ensuring the lithium deintercalation and intercalation processes.Keywords
Funding Information
- European Commission
- MARS-EV (609201)
- GREENLION (285268)
This publication has 30 references indexed in Scilit:
- Enabling aqueous binders for lithium battery cathodes – Carbon coating of aluminum current collectorJournal of Power Sources, 2014
- Performance of LiNi1/3Mn1/3Co1/3O2/graphite batteries based on aqueous binderJournal of Power Sources, 2014
- Electrochemical properties of 0.6Li[Li1/3Mn2/3]O2–0.4LiNixMnyCo1−x−yO2 cathode materials for lithium-ion batteriesJournal of Power Sources, 2012
- Investigations on cellulose-based high voltage composite cathodes for lithium ion batteriesJournal of Power Sources, 2011
- Synthesis and electrochemical performance of the high voltage cathode material Li[Li0.2Mn0.56Ni0.16Co0.08]O2 with improved rate capabilityJournal of Power Sources, 2011
- Use of natural binders and ionic liquid electrolytes for greener and safer lithium-ion batteriesJournal of Power Sources, 2011
- Continuous monitoring of aluminum corrosion process in deaerated waterCorrosion Science, 2007
- Li2MnO3-stabilized LiMO2 (M = Mn, Ni, Co) electrodes for lithium-ion batteriesJournal of Materials Chemistry, 2007
- Study of styrene butadiene rubber and sodium methyl cellulose as binder for negative electrodes in lithium-ion batteriesJournal of Power Sources, 2006
- Demonstrating Oxygen Loss and Associated Structural Reorganization in the Lithium Battery Cathode Li[Ni0.2Li0.2Mn0.6]O2Journal of the American Chemical Society, 2006