Fault Diagnosis and Tolerance With Low Torque Ripple for Open-Switch Fault of IM Drives
- 30 June 2020
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Transportation Electrification
- Vol. 7 (1) , 133-146
Abstract
In this paper, for insulated gate bipolar transistor (IGBT) open-switch faults in voltage-source inverter-based field-oriented control induction machine drives, both the diagnosis method and the fault-tolerant strategy are presented. In the fault diagnosis method, phase voltages are reconstructed from the variables of the control system. Thus, additional sensors can be avoided. Then, the voltages of healthy and faulty conditions are analyzed. Next, the residual behaviors for faulty conditions are derived based on a comprehensive switching function model that considers the health state of the power switch. On this basis, fault detection and localization criteria can be obtained. In the fault-tolerant strategy, the three-phase six-switch (TPSS) topology and three-phase four-switch (TPFS) topology are combined. TPSS topology can provide the zero state, which eliminates the torque ripple caused by the zero state synthesis. An analytical comparison of torque ripples of TPSS and TPFS is given. It shows that TPFS topology has lower torque ripple at higher speed and lighter load while TPSS topology has lower torque ripple at lower speed and heavier load. By combining them, the lower torque ripple can be achieved at both high and low speed and heavy and light load. Finally, hardware-in-the-loop tests are carried out to show the effectiveness of the proposed methods.Keywords
Funding Information
- National Nature Science Foundation of China (U1434203)
- Research Project of China Railway Eryuan Engineering Group Company Ltd. (KYY2020033(20-21))
This publication has 51 references indexed in Scilit:
- Fault-Tolerant Inverter for Power Flow Control in Variable-Speed Four-Wire Permanent-Magnet GeneratorsIEEE Transactions on Industrial Electronics, 2015
- Comprehensive Modelling and and Experimental Testing of Fault Detection and Management of a Non-Redundant Fault-Tolerant VSIIEEE Transactions on Industrial Electronics, 2015
- Study and Handling Methods of Power IGBT Module Failures in Power Electronic Converter SystemsIEEE Transactions on Power Electronics, 2014
- Current Residual Vector-Based Open-Switch Fault Diagnosis of Inverters in PMSM Drive SystemsIEEE Transactions on Power Electronics, 2014
- Multiple Open-Circuit Faults Diagnosis in Back-to-Back Converters of PMSG Drives for Wind Turbine SystemsIEEE Transactions on Power Electronics, 2014
- Diagnosis of open‐switch faults in variable speed drives by stator current analysis and pattern recognitionIET Electric Power Applications, 2013
- Space vector pulse‐width modulation algorithm and DC‐side voltage control strategy of three‐phase four‐switch active power filtersIET Power Electronics, 2013
- Robust fault diagnosis scheme for open-circuit faults in voltage source inverters feeding induction motors by using non-linear proportional-integral observersIET Power Electronics, 2012
- Fault diagnosis of three-parallel voltage-source converter for a high-power wind turbineIET Power Electronics, 2012
- Fault-Tolerant Voltage-Fed PWM Inverter AC Motor Drive SystemsIEEE Transactions on Industrial Electronics, 2004