Toughening polylactide by direct blending of cellulose nanocrystals and epoxidized soybean oil
- 12 July 2019
- journal article
- research article
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 136 (46) , 48221
Abstract
Polylactide (PLA) is a bio‐based polymeric material which is earth abundant in nature. It also possesses abundant strength and stiffness making it a promising material for industrial applications. However, its brittle behavior is currently limiting research work on them. As such, an eco‐friendly blending approach is developed in this study in order to fabricate a ductile and toughen PLA composites using renewable bio‐based materials as a precursor. Specifically, PLA, epoxidized soybean oil (ESO), and frangible powder form of cellulose nanocrystals (CNCs) are melt blended to prepare the ternary composite system (PLA/CNC/ESO). During the composite routing, it is found out that the ESO successfully attached to the surface of CNC which in turn results in CNC/ESO mixtures in the PLA matrix. This intrinsic combination induces cavitation which consumes the energy produced under the stretching and impacting, resulting in the turning of the PLA's brittle phenomenon. In fact, a reasonable increase in the ductility is observed. The elongation and notched impact strength of the ternary nanocomposite are found to be ∼32% and ∼4.8 kJ m−2, respectively, which are comparatively higher than that of neat PLA or PLA/CNC composites. Differential scanning calorimetry analyses show that the ESO layer on CNC affects the thermal characteristics of PLA in the ternary composite while thermogravimetric analysis shows that there is an increase in the char yield of the composite. Furthermore, scanning electron microscopy analysis shows that the synthesis approach adopted here enables a mechanistically turning of the PLA's brittle phenomenon to ductile. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci.2019,136, 48221.Keywords
Funding Information
- Chinese Academy of Sciences
This publication has 66 references indexed in Scilit:
- Effect of nanoclay-type and PLA optical purity on the characteristics of PLA-based nanocomposite filmsJournal of Food Engineering, 2013
- A Comparative Study on the Mechanical, Thermal and Morphological Characterization of Poly(lactic acid)/Epoxidized Palm Oil BlendInternational Journal of Molecular Sciences, 2012
- Heat and humidity performance of injection molded PLA for durable applicationsJournal of Applied Polymer Science, 2009
- An Overview of Polylactides as Packaging MaterialsMacromolecular Bioscience, 2004
- Biodegradable Films of Partly Branched Poly(l-lactide)-co-poly(ε-caprolactone) Copolymer: Modulation of Phase Morphology, Plasticization Properties and Thermal DepolymerizationBiomacromolecules, 2004
- Tributyl citrate oligomers as plasticizers for poly (lactic acid): thermo-mechanical film properties and agingPolymer, 2003
- New polylactide/layered silicate nanocomposites. 5. Designing of materials with desired propertiesPolymer, 2003
- Properties of lactic acid based polymers and their correlation with compositionProgress in Polymer Science, 2002
- Effect of Trace Electrolyte on Liquid Crystal Type of Cellulose MicrocrystalsLangmuir, 2001
- Micromechanical deformation processes in toughened and particle filled semicrystalline polymers: Part 2. model representation for micromechanical deformation processesPolymer, 1998