Mechanics of 3D-Printed Polymer Lattices with Varied Design and Processing Strategies
Open Access
Abstract
Emerging polymer 3D-printing technologies are enabling the design and fabrication of mechanically efficient lattice structures with intricate microscale structures. During fabrication, manufacturing inconsistencies can affect mechanical efficiency, thereby driving a need to investigate how design and processing strategies influence outcomes. Here, mechanical testing is conducted for 3D-printed lattice structures while altering topology, relative density, and exposure time per layer using digital light processing (DLP). Experiments compared a Cube topology with 800 µm beams and Body-Centered Cube (BCC) topologies with 500 or 800 µm beams, all designed with 40% relative density. Cube lattices had the lowest mean measured relative density of ~42%, while the 500 µm BCC lattice had the highest relative density of ~55%. Elastic modulus, yield strength, and ultimate strength had a positive correlation with measured relative density when considering measurement distributions for thirty samples of each design. BCC lattices designed with 50%, 40%, and 30% relative densities were then fabricated with exposure-per-layer times of 1500 and 1750 ms. Increasing exposure time per layer resulted in higher scaling of mechanical properties to relative density compared to design alteration strategies. These results reveal how design and fabrication strategies affect mechanical performance of lattices suitable for diverse engineering applications.Keywords
This publication has 52 references indexed in Scilit:
- Understanding Process Parameter Effects of RepRap Open-Source Three-Dimensional Printers Through a Design of Experiments ApproachJournal of Manufacturing Science and Engineering, 2015
- Numerical investigation on mechanical properties of cellular lattice structures fabricated by fused deposition modelingInternational Journal of Mechanical Sciences, 2014
- Ultralight, ultrastiff mechanical metamaterialsScience, 2014
- Continuous digital light processing (cDLP): Highly accurate additive manufacturing of tissue engineered bone scaffoldsVirtual and Physical Prototyping, 2012
- Shock absorption performance of a motorbike helmet with honeycomb reinforced linerComposite Structures, 2011
- Titanium-Based Biomaterials for Preventing Stress Shielding between Implant Devices and BoneInternational Journal of Biomaterials, 2011
- Mathematically defined tissue engineering scaffold architectures prepared by stereolithographyBiomaterials, 2010
- Selective Laser Melting: A regular unit cell approach for the manufacture of porous, titanium, bone in‐growth constructs, suitable for orthopedic applicationsJournal of Biomedical Materials Research Part B: Applied Biomaterials, 2008
- The properties of foams and latticesPhilosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences, 2005
- Cellular SolidsMRS Bulletin, 2003