Novel phthalonitrile-based composites with excellent processing, thermal, and mechanical properties
Authors:
- 21 July 2017
- journal article
- research article
- Published by SAGE Publications in High Performance Polymers
- Vol. 30 (6) , 720-730
Abstract
Phthalonitrile resins exhibit excellent thermostability and mechanical strength after curing. However, poor processability made them difficult to fabricate fiber-reinforced composites with desirable integrated performance. In this article, a novel mixed phthalonitrile resin was developed to be used as the matrix for glass fiber–reinforced laminates. Poly (aryl ether nitrile phthalazinone) oligomer end-capped by phthalonitrile units (PPEN-PN) was firstly designed and blended with bisphenol-based phthalonitrile monomers (BP-PN) (Figure 1), which were obtained according to the literature procedure. A novel mixed curing agent (zinc chloride and 4,4-diamine-diphenylsulfone) was also exploited to accelerate curing rate of the resins. Solubility tests, differential scanning calorimetry and rheological studies revealed that the mixed resins exhibited good processability with low processing viscosity. Thermal gravimetric analysis indicated that the cured resins were stable below 530 to approximately 570 °C in nitrogen atmosphere after low-cost curing procedure. In air, char yields of the resins were between 30 to approximately 40% when heated to 800 °C. The laminates reinforced by E-glass fiber cloth possessed a bending strength of 668 MPa with interlaminar shear strength of 84.6 MPa at room temperature. 50% of the strength and modulus was maintained when heated to 400 °C. Consequently, this type of laminates may be potential candidates for aerospace applications.Keywords
Funding Information
- Fundamental Research Funds for the Central Universities (DUT15RC(3)032)
This publication has 33 references indexed in Scilit:
- Design of low temperature self-cured phthalonitrile-based polymers for advanced glass fiber composite laminatesJournal of Materials Science, 2013
- Syntheses and properties of trimethylaminophenoxy-substituted Zn(ii)-phthalocyaninesMedChemComm, 2011
- Preparation and property comparison of ortho, meta, and para autocatalytic phthalonitrile compounds with amino groupPolymers for Advanced Technologies, 2011
- Effect of different aromatic amines on the crosslinking behavior and thermal properties of phthalonitrile oligomer containing biphenyl ethernitrileJournal of Applied Polymer Science, 2011
- Plasticization of poly(arylene ether nitrile) by the melt blending of phthalonitrile prepolymer: A rheological, mechanical, and thermal studyJournal of Applied Polymer Science, 2010
- PREPARATION AND CHARACTERIZATION OF NOVEL CHITOSAN DERIVATIVES: ADSORPTION EQUILIBRIUM OF IRON(III) IONChinese Journal of Polymer Science, 2008
- Synthesis of High Molecular Weight Poly(phthalazinone ether)s by Ullmann C−N and C−O Condensation ReactionsMacromolecules, 2007
- Synthesis and characterization of new soluble poly(aryl ether nitrile)s containing phthalazinone moietyChinese Chemical Letters, 2007
- Low-melting Phthalonitrile Oligomers: Preparation, Polymerization and Polymer PropertiesHigh Performance Polymers, 2006
- Synthesis and electrochemical studies of a covalently linked cobalt( ii ) phthalocyanine–cobalt( ii ) porphyrin conjugateDalton Transactions, 2005