Control of a Novel 2-DoF MEMS Nanopositioner With Electrothermal Actuation and Sensing
- 28 October 2013
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Control Systems Technology
- Vol. 22 (4) , 1486-1497
Abstract
This paper presents the full characterization, modeling, and control of a 2-degrees-of-freedom microelectromechanical systems (MEMS) nanopositioner with fully integrated electrothermal actuators and sensors. Made from nickel Z-shaped beams, the actuators are able to move the device's stage in positive and negative directions (contrary to classical V-shaped electrothermal actuators) and along two axes (x and y). The integrated electrothermal sensors are based on polysilicon resistors, which are heated via Joule heating due to an applied electrical bias voltage. The stage displacement is effectively measured by variations in their resistance, which is dependent on the position of the stage. The characterization tests carried out show that the MEMS nanopositioner can achieve a range of displacement in excess of ±5 μm for each of the x and y axes, with a response time better than 300 ms. A control scheme based on the combination of feedforward and internal model control-feedback is constructed to enhance the general performance of the MEMS device, and in particular to reject the cross-coupling between the two axes and to enhance the accuracy and the response time. The experimental results demonstrate the efficiency of the proposed scheme and demonstrate the suitability of the designed device for nanopositioning applications.Keywords
Funding Information
- Australian Research Council
This publication has 29 references indexed in Scilit:
- Characterization of a 2-DoF MEMS nanopositioner with integrated electrothermal actuation and sensing2012
- Bidirectional Electrothermal Actuator With Z-Shaped BeamsIEEE Sensors Journal, 2012
- Z-Shaped MEMS Thermal Actuators: Piezoresistive Self-Sensing and Preliminary Results for Feedback ControlJournal of Microelectromechanical Systems, 2012
- Design of Contoured Thermomechanical Actuators and Pulsing Actuation to Enhance Dynamic PerformanceJournal of Microelectromechanical Systems, 2011
- Feedforward and IMC-feedback control of a nonlinear 2-DOF piezoactuator dedicated to automated micropositioning tasks2011
- Displacement sensing of a micro-electro-thermal actuator using a monolithically integrated thermal sensorSensors and Actuators A: Physical, 2009
- Simultaneous On-Chip Sensing and Actuation Using the Thermomechanical In-Plane MicroactuatorJournal of Microelectromechanical Systems, 2008
- A servomechanism for a micro-electro-mechanical-system-based scanning-probe data storage deviceNanotechnology, 2004
- A micromachined 2D positioner with electrothermal actuation and sub-nanometer capacitive sensingJournal of Micromechanics and Microengineering, 2003
- A new Smith predictor for controlling a process with an integrator and long dead-timeIEEE Transactions on Automatic Control, 1994