High thermal conductivity silicon nitride ceramics prepared by pressureless sintering with ternary sintering additives
Authors:
- 2 March 2019
- journal article
- research article
- Published by Wiley in International Journal of Applied Ceramic Technology
- Vol. 16 (4) , 1399-1406
Abstract
Silicon nitride ceramics were pressureless sintered at low temperature using ternary sintering additives (TiO2, MgO and Y2O3), and the effects of sintering aids on thermal conductivity and mechanical properties were studied. TiO2–Y2O3–MgO sintering additives will react with the surface silica present on the silicon nitride particles to form a low melting temperature liquid phase which allows liquid phase sintering to occur and densification of the Si3N4. The highest flexural strength was 791(±20) MPa with 12 wt% additives sintered at 1780°C for 2 hours, comparable to the samples prepared by gas pressure sintering. Fracture toughness of all the specimens was higher than 7.2 MPa·m1/2 as the sintering temperature was increased to 1810°C. Thermal conductivity was improved by prolonging the dwelling time and adopting the annealing process. The highest thermal conductivity of 74 W/(m∙K) was achieved with 9 wt% sintering additives sintered at 1810°C with 4 hours holding followed by postannealing.Keywords
Funding Information
- Ministry of Science and Technology of the People's Republic of China (2016YFB0700305)
- National Natural Science Foundation of China (51572277)
- Chinese Academy of Sciences
This publication has 27 references indexed in Scilit:
- Grain boundary glasses in silicon nitride: A review of chemistry, properties and crystallisationJournal of the European Ceramic Society, 2012
- A Tough Silicon Nitride Ceramic with High Thermal ConductivityAdvanced Materials, 2011
- Potential use of only Yb2O3in producing dense Si3N4ceramics with high thermal conductivity by gas pressure sinteringScience and Technology of Advanced Materials, 2010
- Processing and properties of sintered reaction-bonded silicon nitride with Y2O3–MgSiN2: Effects of Si powder and Li2O additionActa Materialia, 2007
- Processing and Thermal Conductivity of Sintered Reaction‐Bonded Silicon Nitride: (II) Effects of Magnesium Compound and Yttria AdditivesJournal of the American Ceramic Society, 2007
- Processing and Thermal Conductivity of Sintered Reaction‐Bonded Silicon Nitride. I: Effect of Si Powder CharacteristicsJournal of the American Ceramic Society, 2006
- Effect of Rare Earth Oxide Additives on the Phase Transformation Rates of Si 3 N 4Journal of the American Ceramic Society, 2006
- Effect of TiX(X=C, N, O) additives on microstructure and properties of silicon nitride based ceramicsScripta Materialia, 2005
- High Thermal Conductivity Non-Oxide Ceramics.Journal of the Ceramic Society of Japan, 2001
- Thermal Conductivity of β‐Si3N4: II, Effect of Lattice OxygenJournal of the American Ceramic Society, 2000