Synthesis of Iron Oxide Nanoparticles via Atmospheric Pressure Microplasma for High-Performance Energy Storage and Environmental Applications
Authors:
- Nafeesa TabasumNTNafeesa Tabasum
- Adnan SaeedAdnan Saeed
- Rizwana ShafiqRSRizwana Shafiq
- Babar Shahzad KhanBKBabar Shahzad Khan
- Mahwish BashirMBMahwish Bashir
- Muhammad YousafMYMuhammad Yousaf
- Shahid RafiqSRShahid Rafiq
- Mohammed Rafi ShaikMohammed Rafi Shaik
- Mujeeb KhanMujeeb Khan
- Abdulrahman AlwarthanAAAbdulrahman Alwarthan
- Mohammed Rafiq H. SiddiquiMSMohammed Rafiq H. Siddiqui
Open Access
Abstract
Energy and environmental challenges are driving researchers to explore cost-effective and eco-friendly nanomaterial fabrication methods. In this study, Atmospheric Pressure Microplasma (AMP) was used to synthesize iron oxide nanoparticles at varying molar concentrations of ferrous sulfate (0.5 M, 1 M, and 1.5 M) under a 15 kV discharge voltage for 90 min. The X-ray diffraction (XRD) results confirmed the formation of mixed cubic and hexagonal phases of magnetite and hematite nanoparticles. The particle size, calculated using the Debye–Scherrer formula, ranged from 9 to 11 nm, depending on the precursor concentration. Scanning electron microscopy (SEM) images revealed spherical nanoparticles at 0.5 M, while agglomeration occurred at 1.5 M. The energy-dispersive X-ray spectroscopy (EDS) analysis confirmed the presence of iron and oxygen in the synthesized nanoparticles. Fourier-transform infrared (FTIR) and UV spectroscopy showed characteristic absorption bands of iron oxide. The impact of the particle size and lattice strain on the optical properties of the nanoparticles was also studied. Smaller nanoparticles exhibited an excellent specific capacitance (627) and a strong charge–discharge performance in a 3 M KOH solution, with a high energy density (67.72) and power density (2227). As photocatalysts, the nanoparticles demonstrated a 97.5% and 96.8% degradation efficiency against methylene blue (MB) and methyl orange (MO), respectively, with high rate constants. These results surpass previous reports. The enhanced electrochemical performance and photocatalytic activity are attributed to the high-quality iron oxide nanoparticles, showing an excellent cyclic stability, making them promising for supercapacitors and environmental remediation.Keywords
Funding Information
- King Saud University (RSPD2025R665)
This publication has 74 references indexed in Scilit:
- Enhanced Wire‐Shaped Micro‐Supercapacitor Treated with a Continuous Surface Atmospheric Pressure Plasma Jet ApproachSmall, 2025
- Advanced materials and technologies for supercapacitors used in energy conversion and storage: a reviewEnvironmental Chemistry Letters, 2020
- Microplasmas for Advanced Materials and DevicesAdvanced Materials, 2019
- Metal Oxide and Hydroxide–Based Aqueous Supercapacitors: From Charge Storage Mechanisms and Functional Electrode Engineering to Need‐Tailored DevicesAdvanced Science, 2019
- Synthesis, characterization and use of iron oxide nano particles for antibacterial activityMicroscopy Research and Technique, 2018
- Electrolytic anion affected charge storage mechanisms of Fe3O4 flexible thin film electrode in KCl and KOH: a comparative study by cyclic voltammetry and galvanostatic charge–dischargeJournal of Materials Science: Materials in Electronics, 2017
- Dip time-dependent SILAR synthesis and electrochemical study of highly flexible PPy-Cu(OH)2 hybrid electrodes for supercapacitorsJournal of Solid State Electrochemistry, 2017
- Recent developments of metal oxide semiconductors as photocatalysts in advanced oxidation processes (AOPs) for treatment of dye waste‐waterJournal of Chemical Technology & Biotechnology, 2011
- Nanoparticulate magnetite thin films as electrode materials for the fabrication of electrochemical capacitorsJournal of Materials Science, 2010
- Photocatalytic degradation for environmental applications – a reviewJournal of Chemical Technology & Biotechnology, 2001