A novel anti-slip control approach for railway vehicles with traction based on adhesion estimation with swarm intelligence
Open Access
- 24 November 2020
- journal article
- research article
- Published by Springer Nature in Railway Engineering Science
- Vol. 28 (4) , 346-364
Abstract
Anti-slip control systems are essential for railway vehicle systems with traction. In order to propose an effective anti-slip control system, adhesion information between wheel and rail can be useful. However, direct measurement or observation of adhesion condition for a railway vehicle in operation is quite demanding. Therefore, a proportional–integral controller, which operates simultaneously with a recently proposed swarm intelligence-based adhesion estimation algorithm, is proposed in this study. This approach provides determination of the adhesion optimum on the adhesion-slip curve so that a reference slip value for the controller can be determined according to the adhesion conditions between wheel and rail. To validate the methodology, a tram wheel test stand with an independently rotating wheel, which is a model of some low floor trams produced in Czechia, is considered. Results reveal that this new approach is more effective than a conventional controller without adhesion condition estimation.Keywords
Funding Information
- University of Pardubice, Eskisehir Technical University
- Newcastle University, Eskisehir Technical University
This publication has 50 references indexed in Scilit:
- Probabilistic opposition-based particle swarm optimization with velocity clampingKnowledge and Information Systems, 2013
- Identification of a wheel–rail adhesion coefficient from experimental data during braking testsProceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit, 2012
- Tribology of the Wheel-Rail Contact: The Effect of Third Body MaterialsInternational Journal of Railway Technology, 2012
- Realization of anti‐slip/skid re‐adhesion control for electric commuter train based on disturbance observerIEEJ Transactions on Electrical and Electronic Engineering, 2009
- A mechatronic approach for effective wheel slip control in railway tractionProceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit, 2008
- Twin disc assessment of wheel/rail adhesionWear, 2008
- Readhesion Control Method without Speed Sensors for Electric Railway VehiclesQuarterly Report of RTRI, 2005
- Combined active steering and traction for mechatronic bogie vehicles with independently rotating wheelsAnnual Reviews in Control, 2004
- Adhesion between rail/wheel under water lubricated contactWear, 2002
- Wheel/rail adhesion and analysis by using full scale roller rigWear, 2002