Problem Statement (Relevance). The rapid development of modern engineering and electronics necessitates the improvement of industrial production methods for superconducting systems exhibiting high superconducting per-formance parameters, such as critical current density and superconducting transition temperature (Тс ~90 К). In this work, the process of growing superconducting crystals has been successfully investigated and tested, enabling the production of YBCO single-domain samples of various sizes with specified characteristics (diameters ranging from 20 to 50 mm). The process involves domain growth from a peritectic melt using MgO-doped Sm1.8Ba2.4Cu3.4O7-x single crystals as seed crystals. Methods Applied. Single-domain superconductors have been grown using the top-seeded melt growth technique with a seed crystal having a higher melting point than the superconducting material. Pellet-shaped samples have been fabricated by unidirectional uniaxial pressing of a powder mixture of Y1.8 and 1% CeO 2. The batch of samples has been heated to 1055 K, which is above the peritectic decomposition temperature of Y1.8Ba2.4Cu3.4O7-x but below the decomposition temperature of the seed crystal. Subsequently, the furnace temperature has been lowered to the domain nucleation temperature, and then gradually decreased at a rate of 0.2-0.3 °C/h. Originality. A methodology for measuring the levitation force of superconducting samples is presented. Result. The dependence of the normalized mass of YBCO single-domain samples (30 mm in diameter) on oxygenation time has been obtained. Scanning electron microscopy (SEM) has demonstrated that the superconductors produced by the proposed method are indeed single-domain, as confirmed by the characteristic stepped surface morphology. Practical Relevance. Research on the synthesis of superconducting single-domain ceramics will make it possible to improve such characteris-tics as trapped magnetic field and enable their application as ultra-high-strength magnets.