Ultrafast low-temperature fabrication of strong and tough high-entropy borides-based ceramics via reactive ZrSi 2 -assisted heavy direct current sintering
Authors:
- Lehao LiuLLLehao Liu
- Yingjun LiuYLYingjun Liu
- Yuhan YaoYYYuhan Yao
- Yufei ZuYZYufei Zu
- Zhaofu ZhangZZZhaofu Zhang
- Jianjun ShaJSJianjun Sha
- Yang ZhangYZYang Zhang
- Hongfeng DongHDHongfeng Dong
- Nan ZhangNZNan Zhang
- Shujing ZhangSZShujing Zhang
- Ning ZhangNZNing Zhang
- Wenhao YueWYWenhao Yue
Open Access
- 1 May 2026
- journal article
- Published by Tsinghua University Press in Journal of Advanced Ceramics
- Vol. 15 (7)
Abstract
The ultra-high sintering temperatures required for high-entropy borides (HEB) pose a significant challenge to their processing and practical application. This study introduces an efficient low-temperature fabrication route for dense HEB-based ceramics using reactive ZrSi2-assisted heavy direct current sintering, with a maximum heating rate exceeding 3700 °C/min. A porosity of 1.60 ± 0.61% can be achieved at a sintering temperature of 1000 °C, which is reduced by 600-1000 °C compared to state-of-the-art spark plasma sintering/field-assisted sintering techniques processing of HEBs. Microstructural analysis revealed interdiffusion between HEB and ZrSi2, leading to a core-shell HEB architecture and layered high-entropy silicides. Meanwhile, dislocations and non-uniform stress fields were observed within the HEB grains. These microstructural features synergistically inhibit crack propagation and promote crack deflection and branching. Consequently, both flexural strength and fracture toughness are significantly enhanced. A flexural strength of 963 MPa was attained at 1400 °C, and a fracture toughness of 7.4 MPa·m1/2 was achieved at 1500 °C, surpassing most reported HEB-based ceramics. These results demonstrate that reactive ZrSi2-assisted heavy direct current sintering is a profoundly effective approach for low-temperature manufacturing of high-performance HEB-based ceramics.Keywords
This publication has 53 references indexed in Scilit:
- Achieving Superhardness and Enhanced Toughness in High‐Entropy Boride‐Based Composites by Tailoring Their Multi‐Scale MicrostructuresSmall, 2025
- Review: high-entropy borides—challenges and opportunitiesJournal of Materials Science, 2024
- Strong high-entropy diboride ceramics with oxide impurities at 1800°CScience China Materials, 2023
- Electronic structures and strengthening mechanisms of superhard high‐entropy diboridesRare Metals, 2022
- Microstructure and Mechanical Properties of In-Situ B4C-(TiZrHfNbTa) B2 Composite by Reactive Spark Plasma SinteringJOM, 2022
- First-principles prediction, fabrication and characterization of (Hf0.2Nb0.2Ta0.2Ti0.2Zr0.2)B2 high-entropy boridesCeramics International, 2022
- High-entropy ceramics: Present status, challenges, and a look forwardJournal of Advanced Ceramics, 2021
- Mechanical properties of hot-pressed high-entropy diboride-based ceramicsJournal of Advanced Ceramics, 2020
- Numerical simulation of heat transfer during spark plasma sintering of zirconium diborideCeramics International, 2020
- A high entropy silicide by reactive spark plasma sinteringJournal of Advanced Ceramics, 2019