Microstructural and oxidation effects on fatigue crack initiation mechanisms in a turbine disc alloy
Authors:
Open Access
- 5 January 2023
- journal article
- research article
- Published by Springer Nature in Journal of Materials Science
- Vol. 58 (4) , 1869-1885
Abstract
Effects of microstructure and oxidation on fatigue crack initiation and early propagation processes were investigated in RR1000 turbine disc alloy with different γ′ distributions and carbide distributions on the grain boundary. Fatigue tests were carried out under three-point bending and trapezoidal waveform loading (with a 90 s dwell) at 650 °C in air. The failure mode in both γ′ variants is clearly characterised by intergranular features. A number of fatigue cracks are seen to initiate at grain boundaries with bulged Co-rich oxides at the surface and/or interfaces between carbides and grain boundaries, resulting from oxidation damage assisted by applied loading. Reduced lifetime is closely linked to significant intergranular crack initiation and frequent consequent crack coalescence events, which results in enhanced fatigue crack growth (FCG) rates. The extent of intergranular features and enhanced FCG are more marked where more continuous carbides exist at the grain boundary.Keywords
Funding Information
- Engineering and Physical Sciences Research Council (EP/M000710/1)
This publication has 31 references indexed in Scilit:
- Grain size effects in a Ni-based turbine disc alloy in the time and cycle dependent crack growth regimesInternational Journal of Fatigue, 2014
- Effects of cyclic stress and temperature on oxidation damage of a nickel-based superalloyMaterials Science and Engineering: A, 2011
- High temperature fatigue of nickel-base superalloys – A review with special emphasis on deformation modes and oxidationEngineering Failure Analysis, 2009
- Effects of microstructure on room temperature fatigue crack initiation and short crack propagation in Udimet 720Li Ni-base superalloyInternational Journal of Fatigue, 2008
- Microstructure effects on high temperature fatigue crack initiation and short crack growth in turbine disc nickel-base superalloy Udimet 720LiMaterials Science and Engineering: A, 2007
- Microstructure Properties and Heat Treatment Process of Powder Metallurgy Superalloy FGH95Journal of Iron and Steel Research International, 2006
- Fatigue crack initiation and short crack growth in nickel-base turbine disc alloys?the effects of microstructure and operating parameters*1International Journal of Fatigue, 2003
- Short crack initiation and growth at 600°C in notched specimens of Inconel718Materials Science and Engineering: A, 2003
- Evidence for internal oxidation during oxygen enhanced crack growth in P/M Ni-based superalloysScripta Materialia, 2003
- Dislocation-precipitate interaction and cyclic stress-strain behavior of a γ′ strengthened superalloyMaterials Science and Engineering, 1978