Ultrasonic Measurement of Axial Stress
Authors:
- 1 September 1982
- journal article
- Published by ASTM International in Journal of Testing and Evaluation
- Vol. 10 (5) , 202-211
Abstract
Several applications of ultrasonic techniques are gaining acceptance for accurate preload determination of critical fasteners. In this presentation, one class of techniques based on continuous wave ultrasonics is examined in detail, with benefits and limitations discussed as they apply to accurate determination of fastener preload. The theory of acoustic propagation in strained media is reviewed as it applies to bolt geometries. Propagation measurements in these geometrics require an understanding of guided-wave effects which can influence stress determination. However, studies of the acoustic spectra of rods identify diffraction and resulting mode conversion as the main artifact for such a measurement. The acoustic spectra, obtained with a novel tone burst spectroscopy method, clearly show mode conversion effects at low frequencies to be absent at high frequencies. Changes in the acoustic spectra are shown to accompany applied stress and suggest an instrument technique for measuring changes in fastener strain. The method, called a Reflection Oscillator Ultrasonic Spectrometer (ROUS), is discussed with an improved technique called Pseudo Continuous Wave Method (PCW) described. Data presented are obtained with the PCW for strain in several engineering materials. Bolt geometry is shown to have an influence on the stress measurements. In particular, percent fastener length under load is evaluated for its effect on material strain measurements. A computer model predicting a linear dependence on the percent of fastener under load is verified using the PCW technique. Other aspects of bolt geometry are discussed including poor geometry bolts, bolts with transverse holes, and bolt-loading anisotropy. Experimental techniques for performing measurements on fasteners with poor geometry are discussed.Keywords
This publication has 19 references indexed in Scilit:
- Anharmonic Properties of Solids from Measurements of the Stress Acoustic ConstantJournal of Testing and Evaluation, 1982
- Generalized Grüneisen tensor from solid nonlinearity parametersPhysical Review B, 1980
- Ultrasonic spectrum analysis using frequency-tracked gated rf pulsesThe Journal of the Acoustical Society of America, 1980
- Effects of Material Inhomogeneities on Ultrasonic Measurements: The Problem and a Solution1979
- Phase insensitive acoustoelectric transducerThe Journal of the Acoustical Society of America, 1978
- A transmission oscillator ultrasonic spectrometerReview of Scientific Instruments, 1974
- Electromagnetic leakage in high-frequency continuous-wave ultrasonicsThe Journal of the Acoustical Society of America, 1973
- Use of a Power-Sensitive Detector in Pulse-Attenuation MeasurementsThe Journal of the Acoustical Society of America, 1966
- Nuclear Magnetic Resonance Acoustic Absorption in KI and KBrPhysical Review B, 1959
- Transmission of Elastic Pulses in Metal RodsPhysical Review B, 1949