Projectile impact and drop weight damage on hybrid composites reinforced with woven carbon/glass fibers on SS304 wire mesh
- 11 February 2026
- journal article
- Published by SAGE Publications in International Journal of Damage Mechanics
- Vol. 35 (5) , 766-793
Abstract
Carbon fiber-reinforced polymer (CFRP) composites exhibit excellent mechanical strength. However, they are susceptible to impact loads due to their low interlaminar fracture toughness, leading to delamination. This work presents an innovative hybrid laminate structure in which carbon and glass fiber yarns are hand-woven alternately over a stainless steel 304 wire mesh (SSWM) and incorporated into a CFRP matrix. In contrast to traditional CFRP mesh-reinforced composites, this design integrates metallic mesh with woven fiber yarns to improve load transmission and damage tolerance. Two different types of laminates, nonwoven (NW) and woven (W), with 90° yarn orientations, were produced using the conventional hand layup method. Low-velocity impact tests were performed at drop heights of 0.5 m and 1 m to assess energy absorption and load-bearing capacity. The results show that woven laminates absorbed more energy and could withstand greater loads when struck by a cylindrical indenter than NW laminates. A ballistic impact investigation was conducted on CFRP laminates of 120 × 120 × 3 mm using hemispherical nose-shaped projectiles. Crucial factors, including impact velocity, residual velocity, damage area, percentage of ballistic resistance, and delamination, were derived from the experimental data. The ballistic impact findings indicate that the residual velocity of the NW composite was 12% lower than that of the woven composite under hemispherical projectile impact, thereby confirming the woven composite's enhanced resistance.Keywords
This publication has 36 references indexed in Scilit:
- Low-Velocity Impact Behavior of 3D Printed Sandwich Composite with Polylactic Acid–Micro-crystalline Cellulose Bio-inspired Xylotus Lattice Core: Energy Absorption and CrashworthinessJournal of Materials Engineering and Performance, 2025
- Penetration and Perforation Thresholds of GnPs Reinforced Carbon/Glass Fiber Epoxy Hybrid CompositesPolymer Composites, 2025
- Drop-weight impact and compressive properties of repeatable self-healing carbon fiber reinforced compositesComposites Part B: Engineering, 2024
- Flexural and low velocity impact behaviour of hybrid metal wire mesh/carbon-fibre reinforced epoxy laminatesComposites Communications, 2024
- Ageing effect on the low-velocity impact response of 3D printed continuous fibre reinforced compositesComposites Part B: Engineering, 2023
- Glass/Brass-270 Wire-Mesh Nanosilica Toughened Epoxy Composite: Mechanical, Impact and Fatigue BehaviourSilicon, 2020
- Low Velocity Impact, Fatigue and Visco-elastic Behaviour of Carbon/E-glass Intra-ply fibre-Reinforced Nano-silica Toughened Epoxy CompositeSilicon, 2020
- Finite element modelling of the explosive blast response of carbon fibre-polymer laminatesComposites Part B: Engineering, 2019
- Mechanical Strength Behaviour of Silane Treated E-glass Fibre/Al 6061 & SS-304 Wire Mesh Reinforced Epoxy Resin Hybrid CompositeSilicon, 2018
- Numerical analysis of high velocity impacts on unidirectional laminatesComposite Structures, 2014