Uniaxial Compressive Strength Prediction for Rock Material in Deep Mine Using Boosting-Based Machine Learning Methods and Optimization Algorithms
Authors:
Open Access
- 1 January 2024
- journal article
- research article
- Published by Tech Science Press in Computer Modeling in Engineering & Sciences
- Vol. 140 (1) , 275-304
Abstract
Traditional laboratory tests for measuring rock uniaxial compressive strength (UCS) are tedious and time-consuming. There is a pressing need for more effective methods to determine rock UCS, especially in deep mining environments under high in-situ stress. Thus, this study aims to develop an advanced model for predicting the UCS of rock material in deep mining environments by combining three boosting-based machine learning methods with four optimization algorithms. For this purpose, the Lead-Zinc mine in Southwest China is considered as the case study. Rock density, P-wave velocity, and point load strength index are used as input variables, and UCS is regarded as the output. Subsequently, twelve hybrid predictive models are obtained. Root mean square error (RMSE), mean absolute error (MAE), coefficient of determination (R2), and the proportion of the mean absolute percentage error less than 20% (A-20) are selected as the evaluation metrics. Experimental results showed that the hybrid model consisting of the extreme gradient boosting method and the artificial bee colony algorithm (XGBoost-ABC) achieved satisfactory results on the training dataset and exhibited the best generalization performance on the testing dataset. The values of R2, A-20, RMSE, and MAE on the training dataset are 0.98, 1.0, 3.11 MPa, and 2.23 MPa, respectively. The highest values of R2 and A-20 (0.93 and 0.96), and the smallest RMSE and MAE values of 4.78 MPa and 3.76 MPa, are observed on the testing dataset. The proposed hybrid model can be considered a reliable and effective method for predicting rock UCS in deep mines.Keywords
This publication has 64 references indexed in Scilit:
- Earth Pressure of the Trapdoor Problem Using Three-Dimensional Discrete Element MethodComputer Modeling in Engineering & Sciences, 2023
- Rock Strength Estimation Using Several Tree-Based ML TechniquesComputer Modeling in Engineering & Sciences, 2022
- A Novel Method for the Reconstruction of Road Profiles from Measured Vehicle Responses Based on the Kalman Filter MethodComputer Modeling in Engineering & Sciences, 2022
- Blasting pattern optimization using gene expression programming and grasshopper optimization algorithm to minimise blast-induced ground vibrationsEngineering with Computers, 2021
- A novel systematic and evolved approach based on XGBoost-firefly algorithm to predict Young’s modulus and unconfined compressive strength of rockEngineering with Computers, 2021
- A novel hybrid extreme learning machine–grey wolf optimizer (ELM-GWO) model to predict compressive strength of concrete with partial replacements for cementEngineering with Computers, 2020
- Fine-tuning of neural computing using whale optimization algorithm for predicting compressive strength of concreteEngineering with Computers, 2019
- Evaluation of rockburst occurrence and intensity in underground structures using decision tree approachEngineering with Computers, 2019
- Chaotic gradient artificial bee colony for text clusteringSoft Computing, 2015
- Correlating P-wave Velocity with the Physico-Mechanical Properties of Different RocksPure and Applied Geophysics, 2012