Effect of Swirl Rate on Mixture Formation in a Spark Ignition Engine Based on Laser 2-D Visualization Techniques
Authors:
- 1 November 1993
- conference paper
- Published by SAE International in SAE International Journal of Advances and Current Practices in Mobility
- Vol. 1
Abstract
The mixture distribution and in-cylinder flow field inside the combustion chamber of a spark ignition engine with a swirl control intake system were measured by a pair of laser two-dimensional visualization techniques. The planer-laser-induced exciplex fluorescence technique was used to visualize the in-cylinder mixture formation by obtaining spectrally separated fluorescence images of liquid and vapor phase fuel distributions. The particle image velocimetry (PIV) was used to obtain the images of in-cylinder flow field. Experiments were carried out under various swirling conditions (from high [Rs=3.8] to low [Rs=0.4] swirl rates) to clarify the effect of swirl rate on mixture formation during the intake and compression strokes. Under the high swirling condition, fuel vapor was spread and rotated along the cylinder wall by the swirling flow during the compression stroke. Consequently, the vapor was distributed around the cylinder wall in a doughnut-like shape in the final stage of the compression stroke, with a poor mixture region at the center of the combustion chamber. Under the low swirling condition, a high concentration of fuel vapor was distributed at the exhaust valve side because of the fuel impinging on the cylinder wall on that side and because the fuel mixture traveled in the vertical vortex flow. Combustion flame propagation and engine performance were also measured under the same swirling conditions. With increased swirl rate, the fuel evaporation rate increased and this led to increased combustion stability and reduced HC emissions.Keywords
This publication has 10 references indexed in Scilit:
- Two-Dimensional Measurements of the Fuel Vapor Concentration in the Combustion Chamber of a SI Engine with Laser Rayleigh ScatteringSAE International Journal of Advances and Current Practices in Mobility, 1992
- A Study About In-Cylinder Flow and Combustion in a 4-Valve S.I. EngineSAE International Journal of Advances and Current Practices in Mobility, 1992
- Application of Particle Tracking Velocimetry to the Cyclic Variability of the Pre-Combustion Flow Field in a Motored Axisymmetric EngineSAE International Journal of Advances and Current Practices in Mobility, 1991
- Intake-Generated Swirl and Tumble Motions in a 4-Valve Engine with Various Intake Configurations-Flow Visualization and Particle Tracking VelocimetrySAE International Journal of Advances and Current Practices in Mobility, 1990
- Rayleigh Scattering Measurements of Transient Fuel Vapor Concentration in a Motored Spark Ignition EngineSAE International Journal of Advances and Current Practices in Mobility, 1990
- Flow Structure and Mixing in a Motored Axisymmetric EngineSAE International Journal of Advances and Current Practices in Mobility, 1989
- 2-D Visualization of a Hollow-Cone Spray in a Cup-in-Head, Ported, I.C. EngineSAE International Journal of Advances and Current Practices in Mobility, 1989
- 2-D Visualization of liquid and Vapor Fuel in an I.C. EngineSAE International Journal of Advances and Current Practices in Mobility, 1988
- Vapor/liquid visualization in fuel spraysSymposium (International) on Combustion, 1985
- Spectrally separated fluorescence emissions for diesel fuel droplets and vaporApplied Optics, 1983