The Use of 3D Printing Filaments to Build Moisture Sensors in Porous Materials
Open Access
Abstract
This study explores the application of materials used in 3D printing to manufacture the housings of non-invasive sensors employed in measurements using a TDR (Time Domain Reflectometry) meter. The research investigates whether sensors designed with 3D printing technology can serve as viable alternatives to conventional invasive and non-invasive sensors. This study focuses on innovative approaches to designing humidity sensors, utilizing Fused Deposition Modeling (FDM) technology to create housings for non-invasive sensors compatible with TDR devices. The paper discusses the use of 3D modeling technology in sensor design, with particular emphasis on materials used in 3D printing, notably polylactic acid (PLA). Environmental factors, such as moisture in building materials, are characterized, and the need for dedicated sensor designs is highlighted. The software utilized in the 3D modeling and printing processes is also described. The Materials and Methods Section provides a detailed account of the construction process for the non-invasive sensor housing and the preparation for moisture measurement in silicate materials using the designed sensor. A prototype sensor was successfully fabricated through 3D printing. Using the designed sensor, measurements were conducted on silicate samples soaked in aqueous solutions with water absorption levels ranging from 0% to 10%. Experimental validation involved testing silicate samples with the prototype sensor to evaluate its effectiveness. The electrical permittivity of the material was calculated, and the root-mean-square error (RMSE) was determined using classical computational methods and machine learning techniques. The RMSE obtained using the classical method was 0.70. The results obtained were further analyzed using machine learning models, including Gaussian Process Regression (GPR) and Support Vector Machine (SVM). The GPR model achieved an RMSE of 0.15, while the SVM model yielded an RMSE of 0.25. These findings confirm the sensor’s effectiveness and its potential for further research and practical applications.Keywords
Funding Information
- Ministry of Science and Higher Education in Poland (FD-20/IS-6/025, FD-20/DN-10/027, FD-20/DN-10/013)
- LUT university program (FD-20/IS-6/025, FD-20/DN-10/027, FD-20/DN-10/013)
This publication has 55 references indexed in Scilit:
- Surface roughness assessment of ABS and PLA filament 3D printing parts: structural parameters experimentation and semi-empirical modellingThe International Journal of Advanced Manufacturing Technology, 2024
- Modeling the fracture behavior of 3D-printed PLA as a laminate composite: Influence of printing parameters on failure and mechanical propertiesComposite Structures, 2023
- Development and Application of TDR Mini-Probes for Monitoring Moisture in Small-Scale Laboratory TestsInternational Journal of Civil Engineering, 2023
- Influence of 3D printing settings on mechanical properties of ABS at room temperature and 77 KAdditive Manufacturing, 2021
- Applications of PLA in modern medicineEngineered Regeneration, 2020
- Mechanical properties of PLA-graphene filament for FDM 3D printingThe International Journal of Advanced Manufacturing Technology, 2019
- Modeling and parametric optimization of FDM 3D printing process using hybrid techniques for enhancing dimensional precisenessInternational Journal on Interactive Design and Manufacturing (IJIDeM), 2019
- New advances in the biodegradation of Poly(lactic) acidInternational Biodeterioration & Biodegradation, 2017
- Fused-filament 3D printing of drug products: Microstructure analysis and drug release characteristics of PVA-based capletsInternational Journal of Pharmaceutics, 2016
- Application of Time-Domain Reflectometry for Measurement of Moisture Profiles in a Drying ExperimentInternational Journal of Thermophysics, 2011