MEMS Industry-Worth Etching to Fabricate Tapered Structures in SiO2
- 4 October 2017
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Microelectromechanical Systems
- Vol. 26 (6) , 1400-1407
Abstract
This paper presents the results for developing SiO2 plasma etching with tapered sidewalls for microelectromechanical systems (MEMS). The experiment was designed in an industrial inductively-coupled plasma reactive ion etching tool, wherein a two-step etching process was developed for opening vias in the SiO2 with a sidewall angle of 68°–70°. The first step modified the photoresist profile from a vertical to a tapered profile using Ar/O2/CF4 plasma with a high wafer platen power. The second step of SiO2 etching was performed in C4F8/H2-based plasma with added inert gases and used a dual mechanism of photoresist pattern transfer and etch by-product redeposition on the sidewalls. The introduction of the photoresist profile tapering as the first step of the etching process not only facilitated fabrication of tapered sidewalls, but also helped to avoid etch-stop in structures with a critical dimension (CD) down to 1.5 $\mu \text{m}$ and minimize the etch CD shrink. [2017-0089]
Keywords
Funding Information
- Office of the Director of National Intelligence, Intelligence Advanced Research Projects Activity, via Sandia National Laboratories
This publication has 6 references indexed in Scilit:
- Deep SiO2etching with Al and AlN masks for MEMS devicesJournal of Micromechanics and Microengineering, 2015
- Double-Exposure Grayscale PhotolithographyJournal of Microelectromechanical Systems, 2009
- Characteristics of C4F8 plasmas with Ar, Ne, and He additives for SiO2 etching in an inductively coupled plasma (ICP) reactorJournal of Vacuum Science & Technology A, 2003
- Factors Affecting Profile Evolution in Plasma Etching of SiO[sub 2]Journal of the Electrochemical Society, 2003
- Argon and oxygen ion chemistry effects in photoresist etchingJournal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures Processing, Measurement, and Phenomena, 2002
- Multilayer Resist Profile Control in Oxygen Reactive Ion Etching Using Ethanol Gas MixtureJapanese Journal of Applied Physics, 1994