Flash Sintering Samaria-Doped Ceria–Carbon Nanotube Composites
Open Access
Abstract
Composite ceramic green pellets were prepared by attrition milling a mixture of (CeO2)0.8(Sm2O3)0.2 (samaria-doped ceria, SDC) ceramic powder and carbon nanotubes (CNTs), followed by uniaxial and isostatic pressing. The pellets were sintered inside a dilatometer by applying AC electric fields at 850 °C and limiting the electric current to 1 A, achieving 20.2% final shrinkage. The SDC samples reached 13.3% shrinkage under the same conditions. Higher average grain sizes were measured in specimens flash sintered with CNTs. Impedance spectroscopy analyses show that the specimens flash sintered with addition of CNTs have higher electrical conductivity. Higher delivered Joule heating at the interfaces due to the presence of the electronic conductors (CNTs) are proposed as the main reason for that improvement of the electrical behavior.Keywords
Funding Information
- Fundação de Amparo à Pesquisa do Estado de São Paulo (2013/07296-2)
- Conselho Nacional de Desenvolvimento Científico e Tecnológico (470952/2013-0, 303483/2013-0, 311803/2015-6, and 309295/2015-7)
This publication has 60 references indexed in Scilit:
- Electrical Behavior and Microstructural Features of Electric Field-Assisted and Conventionally Sintered 3 mol% Yttria-Stabilized ZirconiaCeramics, 2018
- Ultra-fast firing: Effect of heating rate on sintering of 3YSZ, with and without an electric fieldJournal of the European Ceramic Society, 2017
- From conventional ac flash-sintering of YSZ to hyper-flash and double flashJournal of the European Ceramic Society, 2013
- Electric Field Assisted Sintering of Cubic Zirconia at 390°CJournal of the American Ceramic Society, 2013
- An experimental setup for shrinkage evaluation during electric field-assisted flash sintering: Application to yttria-stabilized zirconiaJournal of the European Ceramic Society, 2013
- Effects of heating rate and DC electric field during sintering on the grain size distribution in fully sintered tetragonal zirconia polycrystals stabilized with 3% molar yttria (3Y-TZP)Journal of Materials Science, 2012
- Space Charge and Grain Boundary Energy in Zirconia ( 3Y‐TZP )Journal of the American Ceramic Society, 2011
- Flash grain welding in yttria stabilized zirconiaJournal of the European Ceramic Society, 2011
- Surface Diffusion‐Controlled Neck Growth Kinetics in Early Stage Sintering of Zirconia, with and without Applied DC Electrical FieldJournal of the American Ceramic Society, 2010
- Flash Sintering of Nanograin Zirconia in <5 s at 850°CJournal of the American Ceramic Society, 2010