Effect of fluence and ambient environment on the surface and structural modification of femtosecond laser irradiated Ti
- 1 January 2016
- journal article
- research article
- Published by IOP Publishing in Chinese Physics B
- Vol. 25 (1) , 018101
Abstract
Under certain conditions, ultrafast pulsed laser interaction with matter leads to the formation of self-organized conical as well as periodic surface structures (commonly reffered to as, laser induced periodic surface structures, LIPSS). The purpose of the present investigations is to explore the effect of fsec laser fluence and ambient environments (Vacuum & O2) on the formation of LIPSS and conical structures on the Ti surface. The surface morphology was investigated by scanning electron microscope (SEM). The ablation threshold with single and multiple (N = 100) shots and the existence of an incubation effect was demonstrated by SEM investigations for both the vacuum and the O2 environment. The phase analysis and chemical composition of the exposed targets were performed by x-ray diffraction (XRD) and energy dispersive x-ray spectroscopy (EDS), respectively. SEM investigations reveal the formation of LIPSS (nano & micro). FFT d-spacing calculations illustrate the dependence of periodicity on the fluence and ambient environment. The periodicity of nano-scale LIPSS is higher in the case of irradiation under vacuum conditions as compared to O2. Furthermore, the O2 environment reduces the ablation threshold. XRD data reveal that for the O2 environment, new phases (oxides of Ti) are formed. EDS analysis exhibits that after irradiation under vacuum conditions, the percentage of impurity element (Al) is reduced. The irradiation in the O2 environment results in 15% atomic diffusion of oxygen.Keywords
This publication has 22 references indexed in Scilit:
- Femtosecond laser-induced ripple structures on magnesiumApplied Physics A, 2013
- Surface analysis correlated with the Raman measurements of a femtosecond laser irradiated Ca F2Applied Surface Science, 2012
- Study on thermal and mechanical properties of cis- and trans-polyisoprene blends implanted by carbon ionsNuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms, 2011
- Material surface damage by quasistationary compression plasma flow actionVacuum, 2010
- Pulse number dependence of laser-induced periodic surface structures for femtosecond laser irradiation of siliconJournal of Applied Physics, 2010
- Mechanisms of femtosecond laser-induced refractive index modification of poly(methyl methacrylate)Journal of the Optical Society of America B, 2009
- Surface micro/nanostructuring of titanium under stationary and non-stationary femtosecond laser irradiationApplied Surface Science, 2009
- The influence of laser power and repetition rate on oxygen and nitrogen insertion into titanium using pulsed Nd:YAG laser irradiationApplied Surface Science, 2007
- The effect of damage accumulation behaviour on ablation thresholds and damage morphology in ultrafast laser micro-machining of common metals in airApplied Surface Science, 2004
- Laser-induced periodic surface structure. I. TheoryPhysical Review B, 1983