Effect of Cr Element in Gas-Shielded Solid Wire for Oil and Gas Long-Distance Pipeline on Microstructure and Low Temperature Toughness of Weld
Open Access
- 25 September 2024
- Vol. 17 (19) , 4704
Abstract
In this paper, the influence of Cr element on the mechanical properties of welded joints of gas-shielded solid wire used in oil and gas long-distance pipelines was studied by means of tensile test, impact test, and hardness test, and the microstructure and crack propagation path of weld were characterized by means of an optical microscope, scanning electron microscope, and electron backscattering diffraction. The results show that with the addition of Cr, the strength and toughness of the weld are significantly improved, in which the tensile strength is increased from 607 MPa to 656 MPa, and the impact toughness is increased from 126.37 J to 223.79 J. The proportion of the ferrite side plate in the weld structure is reduced by about 20%, and the effective grain size of acicular ferrite is reduced by about 15%. The reason is that the addition of the Cr element improves the hardenability of the weld structure, inhibits the formation of the ferrite side plate, and promotes the effective refinement of acicular ferrite, which increases the proportion of high-angle grain boundaries in the weld, effectively hindering the crack propagation, improves the crack propagation work, and thus improves the strength and toughness of the weld.Keywords
This publication has 18 references indexed in Scilit:
- Controlled Rolling of X80 Pipeline Steel in the Austenite Recrystallization Temperature Region and Its Effect on the Microstructure and Mechanical propertiesSteel Research International, 2021
- Study on Microstructure Characterization and Impact Toughness in the Reheated Coarse-Grained Heat Affected Zone of V-N Microalloyed SteelJournal of Materials Engineering and Performance, 2021
- Effect of Trace Element on Microstructure and Fracture Toughness of Weld MetalActa Metallurgica Sinica (English Letters), 2019
- Extended Hall–Petch Relationships for Yield, Cleavage and Intergranular Fracture Strengths of bcc Steel and Its Deformation and Fracture BehaviorsMetals and Materials International, 2018
- Microstructure and toughness of the CGHAZ of an offshore platform steelJournal of Materials Processing Technology, 2015
- Analysis of microstructural variation and mechanical behaviors in submerged arc welded joint of high strength low carbon bainitic steelMaterials Science and Engineering: A, 2012
- Microstructural characteristics and toughness of the simulated coarse grained heat affected zone of high strength low carbon bainitic steelMaterials Science and Engineering: A, 2011
- Effect of microstructure on cleavage resistance of high-strength quenched and tempered steelsMaterials Letters, 2009
- Dynamic fracture toughness and Charpy impact properties of an AISI 403 martensitic stainless steelJournal of Nuclear Materials, 1996
- The kinetics of ferrite nucleation at austenite grain boundaries in Fe-C alloysMetallurgical Transactions A, 1988