Unsteady burning of thin-layer pool fires
Authors:
- 3 August 2011
- journal article
- research article
- Published by SAGE Publications in Journal of Fire Sciences
- Vol. 30 (1) , 3-15
Abstract
The burning behavior of circular, thin-layer n-heptane pool fires having a diameter of 0.2 m and initial fuel thicknesses of 6.5 mm and 13 mm were experimentally studied. Fire parameters and temperature distribution in fuel were recorded during the experiments. Results show that flame height and burning rate exhibited different stages for fires with different thickness of fuel layer, while flame temperature was independent of the fuel layer and was almost constant. The fuel surface temperature increased to its boiling point, with the temperature of fuel below the surface starting to rise shortly after ignition. A boiling zone was formed that increased with time for the thicker fuel layer. A theoretical analysis based on a heat-transfer model is proposed to explain the differences in heat transfer between the liquid and environment during the different burning phases. Reasons for the increase of burning rate are introduced.Keywords
This publication has 15 references indexed in Scilit:
- Initial fuel temperature effects on burning rate of pool fireJournal of Hazardous Materials, 2011
- Experimental study on burning rate of small scale heptane pool firesChinese Science Bulletin, 2010
- Model of large pool firesJournal of Hazardous Materials, 2006
- Fundamentals of Fire Phenomena2006
- Analysis of the geometric and radiative characteristics of hydrocarbon pool firesCombustion and Flame, 2004
- Experimental study of burning rate in hydrocarbon pool firesCombustion and Flame, 2001
- Effect of the fuel boiling point on the boilover burning of liquid fuels spilled on waterSymposium (International) on Combustion, 1996
- Heat transfer in small scale pool firesCombustion and Flame, 1994
- Estimating large pool fire burning ratesFire Technology, 1983
- Froude modeling of pool firesSymposium (International) on Combustion, 1982