Synthesis, structure and properties of carbon nanotube/poly( p ‐phenylene benzobisoxazole) composite fibres
Authors:
- 7 March 2006
- journal article
- research article
- Published by Wiley in Polymer International
- Vol. 55 (4) , 456-465
Abstract
Carbon nanotube/poly( p ‐phenylene benzobisoxazole) (CNT/PBO) composite fibres were prepared by in situ polymerization and dry‐jet wet spinning. The structure and properties of the CNT/PBO fibres were investigated. FTIR and viscosity measurements showed that the functional groups on the CNT surface took part in the polymerization and affected the chemical structure and molecular weight of the composite. CNT/PBO composites with high molecular weight could be obtained by controlling the amount and addition time of CNTs. Compared with PBO fibres containing no CNTs prepared under the same conditions, the thermal resistance of the CNT (2 wt%)/PBO fibres was higher and the tensile strength was also improved by 20–50%. WAXD and SEM measurements indicated that the orientation degree of the CNT (2 wt%)/PBO fibres was smaller than that of PBO fibres. The fracture surfaces of these two fibres were also different. CNT dispersion in the CNT (2 wt%)/PBO fibres was examined by TEM. A model of the interactions between CNTs and PBO is proposed, based on these results. Copyright © 2006 Society of Chemical IndustryKeywords
This publication has 29 references indexed in Scilit:
- Polymer/layered silicate nanocomposites: a review from preparation to processingProgress in Polymer Science, 2003
- Synthesis and properties of polybenzoxazole–clay nanocompositesPolymer, 2002
- In-Situ Synchrotron WAXD/SAXS Studies of Structural Development during PBO/PPA Solution SpinningMacromolecules, 2001
- Study of the Mechanism for Poly(p-phenylene)benzoxazole PolymerizationA Remarkable Reaction Pathway To Make Rigid-Rod PolymersMacromolecules, 1998
- Composition characterization of methanesulfonic acidJournal of Chemical & Engineering Data, 1994
- Synthesis and properties of aromatic polyamide‐benzoxazoles from trimethylsilyl‐substituted 2,4‐diaminophenol and aromatic dicarboxylic acid chloridesJournal of Polymer Science Part A: Polymer Chemistry, 1991
- Theoretical Young's moduli of poly(p-phenylenebenzobisthiazole) and poly(p-phenylenebenzobisoxazole)Macromolecules, 1991
- Morphology and properties of rigid-rod poly(p-phenylene benzobisoxazole) (PBO) and stiff-chain poly(2,5(6)-benzoxazole) (ABPBO) fibresPolymer, 1988
- Synthesis of poly(benzoxazole)s by direct polycondensation of dicarboxylic acids with 3,3′‐dihydroxybenzidine dihydrochloride using phosphorus pentoxide/methanesulfonic acid as condensing agent and solventJournal of Polymer Science Part A: Polymer Chemistry, 1986
- Synthesis, spinning, and fiber mechanical properties of poly(p-phenylenebenzobisoxazole)Macromolecules, 1981