A suspended microchannel with integrated temperature sensors for high-pressure flow studies
Authors:
- Y.C. TaiYTY.C. Tai
- 27 November 2002
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- No. 10846999,p. 87-92
Abstract
A freestanding microchannel, with integrated temperature sensors, has been developed for high-pressure flow studies. These microchannels are approximately 20 /spl mu/m/spl times/2 /spl mu/m/spl times/4400 /spl mu/m, and are suspended above 80 /spl mu/m deep cavities, bulk micromachined using BrF/sub 3/ dry etch. The calibration of the lightly boron-doped thermistor-type sensors shows that the resistance sensitivity of these integrated sensors is parabolic with respect to temperature and linear with respect to pressure. Volumetric flow rates of NZ in the microchannel were measured at inlet pressures up to 578 psig. The discrepancy between the data and theory results from the flow acceleration in a channel, the nonparabolic velocity profile, and the bulging of the channel. Bulging effects were evaluated by using incompressible water flow measurements, which also measures 1.045/spl times/10/sup -3/N-s/m/sup 2/ for the viscosity of DI water. The temperature data from sensors on the channel shows the heating of the channel due to the friction generated by the high-pressure flow inside.Keywords
This publication has 4 references indexed in Scilit:
- Gaseous slip flow in long microchannelsJournal of Microelectromechanical Systems, 1997
- Gas flow in micro-channelsJournal of Fluid Mechanics, 1995
- Compressible laminar flow in a capillaryJournal of Fluid Mechanics, 1993
- Laminar compressible flow in a tubeFlow, Turbulence and Combustion, 1986