High-Temperature Behavior of High-Pressure Diecast Alloys Based on the Al-Si-Cu System: The Role Played by Chemical Composition
Open Access
Abstract
Al-Si-Cu foundry alloys are widely applied in the form of high-pressure diecast components. They feature hypo- or nearly eutectic compositions, such as AlSi9Cu3(Fe), AlSi11Cu2(Fe), and AlSi12Cu1(Fe) alloys, which are used in the present study. Diecast specimens, with a thickness of 3 mm, were used for tension tests. The short-term mechanical behavior was characterized at temperatures from 25 up to 450 °C. At temperatures above 200 °C, the tensile strength properties (YS and UTS) of the investigated alloys were severely affected by temperature, and less by chemical differences. Material hardness and ductility indexes better highlighted the differences in the mechanical behavior of these age-hardenable alloys and allowed us to relate them to the microstructure and its changes that took place at test temperatures. Thermodynamic calculations were found to be useful tools to predict phases formed during solidification, as well as those related to precipitation strengthening. By means of the performed comprehensive material characterization, deeper knowledge of the microstructural changes of Al-Si-Cu foundry alloys during short-term mechanical behavior was obtained. The gained knowledge can be used as input data for constitutive modeling of the investigated alloys.Keywords
Funding Information
- European Commission (FP7-2012-NMP-ICT-FoF, grant agreement n° 314145)
This publication has 23 references indexed in Scilit:
- Effect of iron on the microstructure and mechanical property of Al–Mg–Si–Mn and Al–Mg–Si diecast alloysMaterials Science and Engineering: A, 2013
- Iron-Containing Intermetallic Phases in Al-Si Based Casting AlloysProcedia Materials Science, 2012
- Effect of Alloying Elements on High Temperature Mechanical Properties for Piston AlloyMATERIALS TRANSACTIONS, 2012
- Influence of additives on the microstructure and tensile properties of near-eutectic Al–10.8%Si cast alloyMaterials & Design (1980-2015), 2009
- Thermal analysis of Al-Cu-Mg-Si alloy with Ag/Zr additionsJournal of Thermal Analysis and Calorimetry, 2008
- A crystallographic identification of intermetallic phases in Al–Si alloysMaterials Letters, 2005
- The effect of iron and manganese on the formation of intermetallic compounds in aluminum–silicon alloysMaterials Science and Engineering: A, 2004
- Effect of iron and manganese contents on convection-free precipitation and sedimentation of primary α-Al(FeMn)Si phase in liquid Al-11.5Si-0.4Mg alloyJournal of Materials Science, 2004
- Modelling of microsegregation in ternary alloys: Application to the solidification of Al–Mg–SiActa Materialia, 2000
- Microstructural aspects of the dissolution and melting of Al2Cu phase in Al-Si alloys during solution heat treatmentMetallurgical and Materials Transactions A, 1996