Thermoelectric and mechanical responses of SiC-whisker-reinforced Ge0.9Sb0.1Te composites with different whisker geometries and milling routes
Authors:
- Jingyuan DengJDJingyuan Deng
- Hu HeHHHu He
- Congshuai CaoCCCongshuai Cao
- Taolin ZhaoTZTaolin Zhao
- Xin LiXLXin Li
- Hongyi LuoHLHongyi Luo
- Weiming WuWWWeiming Wu
- Fengkai GuoFGFengkai Guo
- Xian TangXTXian Tang
Preprint
- 9 September 2026
- preprint
- Published by Elsevier in SSRN Electronic Journal
Abstract
The intrinsic brittleness of GeTe-based thermoelectric materials limits their mechanical reliability. SiC whiskers were introduced into a GeTe-based thermoelectric matrix for the first time as a reinforcing secondary phase. Ge0.9Sb0.1Te was used as the matrix, and two whisker geometries were combined with dry and ethanol-assisted ball milling to examine their effects on the post-milling whisker state, microstructure, thermoelectric transport, and mechanical response. Ethanol-assisted milling retained longer whisker segments in both whisker systems, although the coarse- and fine-whisker composites exhibited different microstructural and property responses. Increasing the SiC whisker content did not produce a monotonic improvement in thermoelectric performance. Among the ethanol-milled coarse-whisker composites, the 0.5 vol% sample showed a favorable balance between electrical and thermal transport and reached a ZT of approximately 2.04 at 773 K. By contrast, the corresponding fine-whisker composite showed a greater mechanical improvement, with a flexural strength of 50.7 MPa and a fracture toughness of 1.60 MPa m1/2. Fracture-surface observations revealed whisker pullout, crack bridging, and crack deflection, consistent with increased resistance to crack propagation. The results indicate that whisker retention alone does not determine the overall performance of the composites. Processing conditions that favor thermoelectric transport are therefore not necessarily those that provide the greatest mechanical reinforcement.Keywords
This publication has 21 references indexed in Scilit:
- Chemistry in Advancing Thermoelectric GeTe MaterialsAccounts of Chemical Research, 2022
- The Mechanical Properties of Inorganic Thermoelectric Materials: A Review on Characterization Methods and CorrelationsChemnanomat, 2022
- Ultralow Lattice Thermal Conductivity and Superhigh Thermoelectric Figure‐of‐Merit in (Mg, Bi) Co‐Doped GeTeAdvanced Materials, 2021
- Synergistic enhancement effect of SiC whisker and nano-particle on mechanical properties of Co4Sb11.5Te0.5 skutteruditeScripta Materialia, 2020
- Advanced Thermoelectric Design: From Materials and Structures to DevicesChemical Reviews, 2020
- GeTe ThermoelectricsJoule, 2020
- Substantial enhancement of mechanical properties for SnSe based composites with potassium titanate whiskersJournal of Materials Science: Materials in Electronics, 2019
- High Thermoelectric Performance and Enhanced Mechanical Stability of p-type Ge1–xSbxTeChemistry of Materials, 2015
- Fabrication of Zn4Sb3 Bulk Thermoelectric Materials Reinforced with SiC WhiskersJournal of Electronic Materials, 2014
- Thermoelectric and mechanical properties of nano-SiC-dispersed Bi2Te3 fabricated by mechanical alloying and spark plasma sinteringJournal of Alloys and Compounds, 2008