Strengthening of steel structures with CFRP strips
Authors:
- 30 June 2017
- journal article
- Published by Road and Bridge Research Institute in Roads and Bridges – Drogi i Mosty
- Vol. 16 (2) , 85-99
Abstract
The paper presents the results of research on the suitability of externally bonded composite strips of carbon fibre-reinforced polymer (CFRP) for post-strengthening of steel structures. Specimens with the strips applied on both sides (double cover joints) were prepared and subjected to axial tension tests to find which of the eight different configurations of end detailing provides the strongest bond. The strengthening effect of externally bonded composite strips was tested on sixteen steel I-beams, including determination of the effective bond length and the effects of the thickness of adhesive layer and modulus of the CFRP strip on the load capacity of the steel-adhesive-CFRP strip assembly. The research showed that externally adhered CFRP strips can increase the bending strength of steel structures (an 8% increase was obtained in the experiments) and the shape of spew fillet can have a significant influence on the strength of the strengthened system (the difference reaching up to 57%).Keywords
This publication has 13 references indexed in Scilit:
- Interfacial stress analysis of geometrically modified adhesive joints in steel beams strengthened with FRP laminatesConstruction and Building Materials, 2009
- Effect of plate end and adhesive spew geometries on stresses in retrofitted beams bonded with a CFRP plateComposites Part B: Engineering, 2008
- Strengthening a steel bridge with CFRP compositesProceedings of the Institution of Civil Engineers - Structures and Buildings, 2007
- Adhesively bonded lap joints from pultruded GFRP profiles. Part III: Effects of chamfersComposites Part B: Engineering, 2006
- Effective Bond Length of Carbon-Fiber-Reinforced Polymer Strips Bonded to Fatigued Steel Bridge I-GirdersJournal of Bridge Engineering, 2005
- CFRP strengthened butt-welded very high strength (VHS) circular steel tubesThin-Walled Structures, 2004
- Strengthening of a Steel Bridge Girder Using CFRP PlatesJournal of Bridge Engineering, 2001
- Interfacial stresses in plated beamsEngineering Structures, 2001
- Effect of spew geometry on stresses in single lap adhesive jointsInternational Journal of Adhesion and Adhesives, 1998
- The effect of a spew fillet on adhesive stress distributions in laminated composite single-lap jointsComposite Structures, 1995