Progress in $\hbox{Nb}_{3}\hbox{Sn}$ RRP Strand Studies and Rutherford Cable Development at FNAL
Authors:
- 24 September 2013
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 24 (3) , 1-8
Abstract
A strong push to Nb 3 Sn conductor development in the U.S. as well as in Europe has been driven by the development of Nb 3 Sn dipoles and quadrupoles for the Large Hadron Collider (LHC) luminosity upgrades. Rutherford cables with high aspect ratio are used for these magnets to achieve large fields and gradients at relatively low currents. At Fermilab National Accelerator Laboratory (FNAL), 40-strand keystoned cables with and without a stainless steel core were developed and produced using 0.7-mm Nb 3 Sn strands made by Oxford Superconducting Technology with 127 and 169 restacks using the Restacked Rod Process with either NbTa alloy or Ti doping. The performance and properties of such strands and cables were studied to evaluate possible candidates for the production magnets of the LHC upgrades. The electrical performance was first compared for wires under flat-rolling deformation and then in cables made with different processes and geometries. The round wires are also compared under tensile and compressive strain using a Walters' spring variable-temperature probe that was recently commissioned at FNAL. Finally, cable test results obtained with a 14 T/16 T Rutherford cable test facility with a bifilar sample and a superconducting transformer are shown.Keywords
Funding Information
- Fermi Research Alliance, LLC
This publication has 18 references indexed in Scilit:
- Design Studies for the Low-Beta Quadrupoles for the LHC Luminosity UpgradeIEEE Transactions on Applied Superconductivity, 2013
- Superconducting Strand and Cable Development for the LHC Upgrades and BeyondIEEE Transactions on Applied Superconductivity, 2013
- Development and Fabrication of ${\rm Nb}_{3}{\rm Sn}$ Rutherford Cable for the 11 T DS Dipole Demonstrator ModelIEEE Transactions on Applied Superconductivity, 2012
- Design of 11 T Twin-Aperture ${\rm Nb}_{3}{\rm Sn}$ Dipole Demonstrator Magnet for LHC UpgradesIEEE Transactions on Applied Superconductivity, 2011
- Test Results of 15 T ${\rm Nb}_{3}{\rm Sn}$ Quadrupole Magnet HQ01 with a 120 mm Bore for the LHC Luminosity UpgradeIEEE Transactions on Applied Superconductivity, 2010
- Influence of Ti and Ta doping on the irreversible strain limit of ternary Nb3Sn superconducting wires made by the restacked-rod processSuperconductor Science and Technology, 2010
- Design of a Probe for Strain Sensitivity Studies of Critical Current Densities in Superconducting WiresIEEE Transactions on Applied Superconductivity, 2010
- R&D of$rm Nb_3rm Sn$Accelerator Magnets at FermilabIEEE Transactions on Applied Superconductivity, 2005
- Critical Current and Instability Threshold Measurement of$rm Nb_3rm Sn$Cables for High Field Accelerator MagnetsIEEE Transactions on Applied Superconductivity, 2005
- Instabilities in Transport Current Measurements of$rm Nb_3rm Sn$StrandsIEEE Transactions on Applied Superconductivity, 2005