Geometrical feature analysis of Co-Cr-Mo single tracks after selective laser melting processing
Authors:
- Karla MonroyKMKarla Monroy
- Jordi DelgadoJDJordi Delgado
- Lidia SerenoLSLidia Sereno
- Joaquim CiuranaJoaquim Ciurana
- Nicolas J HendrichsNHNicolas J Hendrichs
- 20 April 2015
- journal article
- research article
- Published by Emerald Publishing in Rapid Prototyping Journal
- Vol. 21 (3) , 287-300
Abstract
Purpose: – Therefore, the purpose of this study is to understand the relationships between the processing parameters and the geometric form of the produced single tracks, in order to control dimensional quality in future experimentations. The quality of the deposited single track and layer is of prime importance in the selective laser melting (SLM) process, as it affects the product quality in terms of dimensional precision and product performance. Design/methodology/approach: – In this paper, a vertical milling machining center equipped with an Ytterbium-fiber laser was used in the SLM experimentation to form single cobalt-chromium-molybdenum (CoCrMo) tracks. The different geometric features and the influence of the scanning parameters on these morphologic characteristics were studied statistically by means of ANOVA. Findings: – Evidently, track height (h1) inaccuracy reduced in layer thicknesses between 100 and 200 μm. The re-melt depth (h2) was determined by the energy parameters, with laser power of 325-350 W and scanning speed (SS) of 66.6-83.3 mm/s being the most favorable parameters to obtain the required anchoring. Moreover, a contact angle of 117° was proposed as optimal, as it permitted an adequate overlapping region and a full densification, and, finally, an SS of 50 mm/s and a layer thickness of 250 were suggested for its development. Originality/value: – The comprehension of the phenomena inherent to the process is related to the single track geometrical characteristics, which allow the definition of an optimal value for each factor for a further proposal of processing conditions that can finally derive a higher precision, wetting, density and mechanical properties.Keywords
This publication has 27 references indexed in Scilit:
- Laser additive manufacturing of metallic components: materials, processes and mechanismsInternational Materials Reviews, 2012
- Experimental design approach to optimize selective laser melting of martensitic 17‐4 PH powder: part I – single laser tracks and first layerRapid Prototyping Journal, 2012
- Influence of process parameters in the first melting layer of a building platform in a SLM machine2011
- Methodology for analyzing the depth of sintering in the building platform2011
- Thermodynamics of densification of powder compactCeramics International, 2009
- Cutting of 1.2mm thick austenitic stainless steel sheet using pulsed and CW Nd:YAG laserJournal of Materials Processing Technology, 2005
- Mapping and Modelling Single Scan Track Formation in Direct Metal Selective Laser MeltingCIRP Annals, 2004
- Influence of forming conditions on the titanium model in rapid prototyping with the selective laser melting processProceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 2003
- Direct selective laser sintering of metalsRapid Prototyping Journal, 1995
- Schweißen mit Laser1995