Two-dimensional SAXS analysis of hot-stretched linear polyethylene by computer
Authors:
- 1 February 1978
- journal article
- research article
- Published by Taylor & Francis in Journal of Macromolecular Science, Part B
- Vol. 15 (1) , 1-17
Abstract
Two-dimensional small-angle x-ray scattering (SAXS) from a highly drawn and annealed (120° 1044 min) polyethylene sample (Lupolen 6001 H) by using a pinhole camera was fitted theoretically by a new adaptation of Hosemann's general paracrystalline model and a computer program developed for this purpose. The structure model consists of microparacrystallites (mPC's) whose centers build up bundles of mPC, which are called macroparacrystallites (MPC's). They have a lamellarlike structure in drawn and annealed samples with specific lateral grain boundaries, which are overlooked in the two-phase model. Results obtained were compared with those obtained by ČaČkoviČ et al. from the same specimen using the so-called restricted paracrystalline model. The general model eliminates the possibility of physical overlapping in the drawing direction of amorphous and crystalline regions. This removes constraints encountered in the restricted model on the mPC-thickness dispersion parameter gH, and inter-mPC displacement dispersion parameter g33, generated by overlapping effects. Nevertheless the two models give nearly the same results. Fit accuracy parameters have been introduced in a twelve-dimensional parameter space to give an indication of the accuracy of a given fitting and of the upper and lower limits or approximate error brackets of the physical parameters used in the fitting procedure. Because of the diffuse character of the SAXS, only half of the twelve parameters of the paracrystalline model could be obtained with a relatively high accuracy of 1-3%. The density of the “amorphous” phase is 0.89 g/cm3 instead of the 0.85 g/cm3 of a supercooled melt.Keywords
This publication has 10 references indexed in Scilit:
- Annealing effects of polymers and their underlying molecular mechanismsPolymer, 1976
- Two-dimensional small-angle analysis of isotactic polybutene stretched from the meltJournal of Macromolecular Science, Part B, 1974
- Synthesis and polymerization of 8‐OXA‐6‐azabicyclo[3.2.1] octan‐7‐oneJournal of Polymer Science Part C: Polymer Letters, 1973
- Zylindersymmetrische Mittelung des Gitterfaktors parakristalliner Strukturen; Anwendung auf die RöntgenkleinwinkelstreuungColloid and Polymer Science, 1972
- Eine verbesserte Auswertungsmethode für die Röntgenkleinwinkelstreuung von HochpolymerenColloid and Polymer Science, 1971
- Superstrukturänderungen beim Tempern von linearem PolyäthylenColloid and Polymer Science, 1971
- One-dimensional models for small-angle X-ray diffraction from crystalline polymers. I. General modelActa Crystallographica Section A, 1970
- Röntgenographische Untersuchungen der Ordnungszustände in PolymerenBerichte der Bunsengesellschaft für physikalische Chemie, 1970
- Röntgenkleinwinkel- und Dichtemessungen an verstrecktem und getempertem linearem PolyäthylenColloid and Polymer Science, 1969
- Untersuchungen über Pilzfarbstoffe XIV : Über Oosporein, den Farbstoff von Oospora colorans van BeymaRecueil des Travaux Chimiques des Pays-Bas, 1944