Melt spinning of β‐phase poly(vinylidene fluoride) yarns with and without a conductive core
- 8 November 2010
- journal article
- research article
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 120 (2) , 1080-1089
Abstract
When poly(vinylidene fluoride) (PVDF) is to be used as a piezoelectric material, the processing must include the formation of polar β‐phase crystallites, as well as the application of electrically conducting charge collectors, that is, electrodes. In this article, results from the melt spinning of PVDF yarns and a novel bicomponent PVDF‐yarn with a conductive carbon black/polypropylene (CB/PP) core are presented. Melt spinning has been done under conditions typical for industrial large‐scale fiber production. The effects on the resulting crystalline structure of varying the spinning velocity, draw rate, and draw temperature are discussed. The results show that, for maximum α‐to‐β phase transformation, cold drawing should take place at a temperature between 70 and 90°C, and both the draw ratio and the draw rate should be as high as possible. It was observed that the cold drawing necessary to form β‐phase crystallinity simultaneously leads to a decrease in the core conductivity of the bicomponent yarns. In this work, the melt spinning of bicomponent fibers with high‐β‐phase PVDF in the sheath and a CB/PP core was successfully accomplished. The core material remained electrically conductive, paving the way for the use of a CB‐polymer compound as inner electrode in the melt spinning of piezoelectric bicomponent fibers. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011Keywords
This publication has 22 references indexed in Scilit:
- Melt spinning of poly(vinylidene fluoride) fibers and the influence of spinning parameters on β‐phase crystallinityJournal of Applied Polymer Science, 2010
- In situ growth of interdigitated electrodes made of polypyrrole for active fiber compositesPolymers for Advanced Technologies, 2007
- Effect of flow history on poly(vinylidine fluoride) crystalline phase transformationJournal of Applied Polymer Science, 2007
- Influence of piezoelectric cable processing steps on PVDF beta phase contentJournal of Electrostatics, 2001
- Hierarchical structure gradients developed in injection-molded PVDF and PVDF-PMMA blends. I. Optical and thermal analysisJournal of Applied Polymer Science, 1998
- Elongational flow and melt-spinning instability of concentrated suspensions of small particles in polymer meltsJournal of Applied Polymer Science, 1981
- The II-I crystal transformation of poly(vinylidene fluoride) under tensile and compressional stressesPolymer, 1980
- The crystal structure of phase IV of poly(vinylidene fluoride)Journal of Applied Physics, 1980
- The Crystal Structure of the γ Phase of Poly(vinylidene fluoride)Macromolecules, 1980
- Structure and fiber formation in poly‐(vinylidene fluoride)Journal of Polymer Science Part B: Polymer Letters, 1968