Influences of phase composition and thermomechanical conditions on shape memory properties of segmented polyurethanes with amorphous reversible phase
Authors:
- 16 November 2011
- journal article
- research article
- Published by Wiley in Polymer Engineering & Science
- Vol. 52 (5) , 1015-1026
Abstract
We synthesized series of shape memory polyurethanes with amorphous reversible phase (Tg‐SMPUs) and systematically studied their microphase structure and shape memory properties. The Tg‐SMPUs having no or less hard phase showed lower shape recovery. When the volume fraction of hard phase was in the range of 20–30%, the Tg‐SMPUs exhibited the highest shape recovery. As the fraction of hard phase increased further the shape recovery decreased, because more polymer components with higher glass transition temperatures (Tgs) would participate in strain storage. For the Tg‐SMPUs having similar Tgs, those polymers having higher volume fraction of hard phase exhibited higher shape fixity, broader shape recovery region, and larger recovery stress. Increasing deformation strain could raise shape fixity and recovery stress but broaden shape recovery region. The highest recovery stress of a material could be achieved when the deformation occurred at its glass transition temperature below which decreasing deformation temperature could not increase recovery stress further. POLYM. ENG. SCI., 2012. © 2011 Society of Plastics EngineersKeywords
Funding Information
- Institute of Textile and Clothing at the Hong Kong Polytechnic University (GHS/008/04)
This publication has 47 references indexed in Scilit:
- A poly(ethylene glycol)-based smart phase change materialSolar Energy Materials and Solar Cells, 2008
- Shape Memory Polymers and Their Nanocomposites: A Review of Science and Technology of New Multifunctional MaterialsJournal of Nanoscience and Nanotechnology, 2008
- Influence of strain-holding conditions on shape recovery and secondary-shape forming in polyurethane-shape memory polymerSmart Materials and Structures, 2006
- A review of small-angle scattering models for random segmented poly(ether-urethane) copolymersPolymer, 2004
- Glass Transition Behaviors of a Polyurethane Hard Segment based on 4,4‘-Diisocyanatodiphenylmethane and 1,4-Butanediol and the Calculation of Microdomain CompositionMacromolecules, 1997
- Morphology and properties of novel copoly(isocyanurate-urea)s formed by reaction injection mouldingPolymer, 1993
- Compression-molded polyurethane block copolymers. 2. Evaluation of microphase compositionsMacromolecules, 1992
- Compression-molded polyurethane block copolymers. 1. Microdomain morphology and thermomechanical propertiesMacromolecules, 1992
- Multiple melting in segmented polyurethane block copolymersMacromolecules, 1992
- DSC annealing study of microphase separation and multiple endothermic behavior in polyether-based polyurethane block copolymersMacromolecules, 1986