Three-dimensional Numerical Study of the Mixing Behaviour of Twin-screw Elements
Authors:
- 1 March 2012
- journal article
- research article
- Published by Walter de Gruyter GmbH in International Polymer Processing
- Vol. 27 (1) , 111-120
Abstract
In this work the numerical modeling of the flow inside co-rotating twin-screw extruders is performed and solutions are analyzed to determine the mixing behavior of two screw elements: conveying and mixing elements. The flow around intermeshing screws is computed using an immersed boundary finite element method capable of dealing with complex moving solid boundaries. The flow is considered isothermal and the material behaves as a generalized non-Newtonian fluid. Because the viscosity depends on the shear rate, solutions will be shown for various rotation velocities of the screw. The 3D solutions are then analyzed in order to determine various parameters characterizing the flow mixing such as the residence time and the linear stretch. Residence time distribution inside the twin-screw extruder is first computed by using a particle tracking algorithm based on a fourth order Runge-Kutta method. A large number of particles are tracked inside the extruder and the resulting particle data is used to determine the distribution of the residence time and of the linear stretch. The spatial distribution of the residence time is also computed by solving a transport equation tracking the injection time of the polymer melt. The methodology shows important differences in the mixing behavior of the screw elements considered.Keywords
This publication has 21 references indexed in Scilit:
- A finite element immersed boundary method for fluid flow around rigid objectsInternational Journal for Numerical Methods in Fluids, 2011
- A finite element immersed boundary method for fluid flow around moving objectsComputers & Fluids, 2010
- Three-dimensional Finite Element Solution of the Flow in Single and Twin-Screw ExtrudersInternational Polymer Processing, 2010
- Adaptive finite element simulations of fluid flow in twin-screw extrudersComputers & Chemical Engineering, 2003
- Three-dimensional Filling and Post-filling Simulation of Polymer Injection MoldingInternational Polymer Processing, 2001
- Numerical simulation of pressure and velocity profiles in kneading elements of a co‐rotating twin screw extruderPolymer Engineering & Science, 2000
- Distributive mixing in conveying elements of a ZSK‐53 co‐rotating twin screw extruderPolymer Engineering & Science, 1998
- Study of mixing efficiency in kneading discs of co‐rotating twin‐screw extrudersPolymer Engineering & Science, 1997
- Stabilized finite element methods: II. The incompressible Navier-Stokes equationsComputer Methods in Applied Mechanics and Engineering, 1992
- A new finite element formulation for computational fluid dynamics: V. Circumventing the babuška-brezzi condition: a stable Petrov-Galerkin formulation of the stokes problem accommodating equal-order interpolationsComputer Methods in Applied Mechanics and Engineering, 1986