State of the Art in Wearable Wrist Exoskeletons Part II: A Review of Commercial and Research Devices
Open Access
Abstract
Manual handling tasks, both in daily activities and at work, require high dexterity and the ability to move objects of different shapes and sizes. However, musculoskeletal disorders that can arise due to aging, disabilities, overloading, or strenuous work can impact the natural capabilities of the hand with serious repercussions both in working and daily activities. To address this, researchers have been developing and proving the benefits of wrist exoskeletons. This paper, which is Part II of a study on wrist exoskeletons, presents and summarizes wearable wrist exoskeleton devices intended for use in rehabilitation, assistance, and occupational fields. Exoskeletons considered within the study are those available either in a prototyping phase or on the market. These devices can support the human wrist by relieving pain or mitigating fatigue while allowing for at least one movement. Most of them have been designed to be active (80%) for higher force/torque transmission, and soft for better kinematic compliance, ergonomics, and safety (13 devices out of 24, more than 50%). Electric motors and cable transmission (respectively 11 and 9 devices, out of 24, i.e., almost 50% and 40%) are the most common due to their simplicity, controllability, safety, power-to-weight ratio, and the possibility of remote actuation. As sensing technologies, position and force sensors are widely used in all devices (almost 90%). The control strategy depends mainly on the application domain: for rehabilitation, CPM (control passive motion) is preferred (35% of devices), while for assistance and occupational purposes, AAN (assistance-as-needed) is more suitable (38% of the devices). What emerges from this analysis is that, while rehabilitation and training are fields in which exoskeletons have grown more easily and gained some user acceptance (almost 18 devices, of which 4 are available on the market), relatively few devices have been designed for occupational purposes (5, with only 2 available on the market) due to difficulties in meeting the acceptance and needs of users. In this perspective, as a result of the state-of-the-art analysis, the authors propose a conceptual idea for a portable soft wrist exoskeleton for occupational assistance.Keywords
All Related Versions
Funding Information
- Italian Workers Compensation Authority (INAIL) (J59C20001570005)
This publication has 73 references indexed in Scilit:
- In-vivo confirmation of the use of the dart thrower’s motion during activities of daily livingJournal of Hand Surgery (European Volume), 2012
- Effect of Intensive Training With a pring-Assisted Hand Orthosis on Movement Smoothness in Upper Extremity Following Stroke: A Pilot Clinical TrialTopics in Stroke Rehabilitation, 2012
- Static Progressive Orthoses for the Upper Extremity: A Comprehensive Literature ReviewHAND, 2011
- Surface EMG pattern recognition for real-time control of a wrist exoskeletonBioMedical Engineering OnLine, 2010
- Dynamic splinting in wrist extension following distal radius fracturesJournal of Orthopaedic Surgery and Research, 2010
- Static progressive splinting to improve wrist stiffness after distal radius fracture: A prospective, case series studyPhysiotherapy Theory and Practice, 2009
- Changes in Impairment and Function after Static Progressive Splinting for Stiffness After Distal Radius FractureJournal of Hand Therapy, 2008
- Bernardino Ramazzini: The Father of Occupational MedicineAmerican Journal of Public Health, 2001
- SupplementScandinavian Journal of Work, Environment & Health, 2001
- Ergonomics considerations in hand and wrist tendinitisThe Journal of Hand Surgery, 1987