THE USE OF NEGATIVE BIAS POTENTIAL FOR STRUCTURAL ENGINEERING OF VACUUM-ARC NITRIDE COATINGS BASED ON HIGH-ENTROPY ALLOYS
Authors:
- O.V. Sobol'OSO.V. Sobol'
- A.A. AndreevAAA.A. Andreev
- V.F. Gorban'VGV.F. Gorban'
- Н.о. PostelnykНPН.о. Postelnyk
- V.A. StolbovoyVSV.A. Stolbovoy
- A.V. ZvyagolskyAZA.V. Zvyagolsky
- A.V. DolomanovADA.V. Dolomanov
- Zh.V. KraievskaZKZh.V. Kraievska
- 1 April 2019
- journal article
- Published by Problems of Atomic Science and Technology
- p. 127-135
Abstract
The effect of negative bias potential (Ub = -40, -110, and -200 V) during the deposition of multi-element coat-ings on their composition, structure and mechanical properties was studied. It was established that during the transi-tion from a multi-element alloy to a nitride, a single-phase state possible to form on its basis (based on the fcc metal lattice, structural type NaCl). In this case, the composition (FeCoNiCuAlCrV)N of coatings with increasing Ub is de-pleted by the element with the lowest enthalpy of formation of nitride (Cu). In (AlCrTiNbSi)N and (AlCrTiZrNbV)N coatings, the content of low-mass elements (Si and Al) decreases with increasing Ub. In (TiZrHfVNb)N coatings of strong nitride-forming elements with increasing Ub to 200 V, the composition practically does not change. The struc-ture of such coatings is characterized by the presence of a texture with the [111] axis. The presence of weak nitride-forming elements in (FeCoNiCuAlCrV)N coatings leads to the formation of texture [110] for large Ub = 110…200 V. In such coatings, the hardness does not exceed 35 GPa. It is shown that to achieve high hardness at high Ub it is necessary to increase the content in the high-entropy alloy of elements with high nitride-forming ability. In this case, in (TiZrHfVNb)N coatings (made of strong nitride-forming elements with a large mass) at Ub = 200 V, the hardness exceeds 45 GPa.Keywords
This publication has 40 references indexed in Scilit:
- Fatigue behavior of Al0.5CoCrCuFeNi high entropy alloysActa Materialia, 2012
- Reproducibility of the single-phase structural state of the multielement high-entropy Ti-V-Zr-Nb-Hf system and related superhard nitrides formed by the vacuum-arc methodTechnical Physics Letters, 2012
- Characterization of multi-principal-element (TiZrNbHfTa)N and (TiZrNbHfTa)C coatings for biomedical applicationsJournal of the Mechanical Behavior of Biomedical Materials, 2012
- Prediction of high-entropy stabilized solid-solution in multi-component alloysMaterials Chemistry and Physics, 2012
- Characteristics of (TiAlCrNbY)C films deposited by reactive magnetron sputteringSurface and Coatings Technology, 2010
- Mechanical and tribological properties of multi-element (AlCrTaTiZr)N coatingsSurface and Coatings Technology, 2008
- Preparation and characterization of AlCrTaTiZr multi-element nitride coatingsSurface and Coatings Technology, 2006
- Microstructural design of hard coatingsProgress in Materials Science, 2006
- Peculiarities of structure state and mechanical characteristics in ion-plasma condensates of quasibinary system borides W2B5-TiB2Science of Sintering, 2006
- Nanostructured High‐Entropy Alloys with Multiple Principal Elements: Novel Alloy Design Concepts and OutcomesAdvanced Engineering Materials, 2004