PTFE/PEEK Lubrication of Rolling Point Contacts by Double Transfer Films

Authors:

Abstract
Polytetrafluoroethylene (PTFE) is widely used as a solid lubricant due to its exceptional friction-reducing properties, but its high wear rates reduce its applicability in highly loaded tribological contacts. This limitation can be addressed by continuously relubricating the contact area using transfer films originating from a sacrificial PTFE reservoir, or by enhancing PTFE’s stability through blending with more wear-resistant polymers such as polyether ether ketone (PEEK). Here, we combine the two approaches and present a PTFE/PEEK compound that shows PTFE-like friction in ball-on-disk tribometer tests. The amount of material required for relubrication is reduced by a factor of 1000 compared to pure PTFE. In addition to PEEK’s high intrinsic stability, this is due to a pronounced chemical coupling between the PTFE particles and the surrounding PEEK matrix, as shown by scanning electron microscopy. A second PTFE/PEEK compound with less chemical coupling proves to be tribologically unsuitable. Molecular dynamics simulations suggest that PTFE/PEEK can effectively reduce friction by forming multiple PTFE shear bands, over which the shear deformation is distributed. Friction reduction is independent of whether PTFE forms a single layer or multiple thin layers, provided the thickness of the total PTFE sheared remains constant. Multiple PTFE/PEEK interfaces anchor PTFE more strongly, prevent its squeeze-out, and limit PTFE removal from the contact zone. We present a framework for designing solid lubricants that enable double-transfer lubrication in rolling-point contacts with minimal lubricant consumption, suitable for high-performance, fluid-free rolling-element bearings and other highly loaded rolling/sliding contacts, such as roller tappets or radial piston motors.