Lightweight, thermally insulating, and low dielectric microcellular high-impact polystyrene (HIPS) foams fabricated by high-pressure foam injection molding with mold opening
- 15 October 2018
- journal article
- research article
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry C
- Vol. 6 (45) , 12294-12305
Abstract
In this study, we used a high-pressure foam injection molding process to fabricate microcellular high-impact polystyrene (HIPS) foams with a tailored cellular structure. The process is cost-effective, highly efficient and flexible, and can be easily scaled up to complex components. The cellular structure of HIPS foam can be tuned over a wide range by manipulating packing time, cooling time, mold temperature, and mold-opening distance. Microcellular HIPS foam with a weight reduction of up to 60% was prepared, which possesses a low thermal conductivity of 60 mW m−1 K−1 and an ultra-low dielectric constant of 1.25. Both the thermal conductivity and the dielectric constant can be tailored by regulating the expansion ratio of HIPS foam. Mathematical models based on the mixing rule were developed to clarify the dependence of thermal conductivity and dielectric constant on the cellular structure of the foam. The outstanding thermally and electrically insulating properties of HIPS foams come from a large amount of air in the microcellular structure. These lightweight, thermally insulating, and ultralow dielectric microcellular HIPS foams hold great promise as an ultra-efficient insulating material for future use in many applications such as microelectronics and microelectromechanical systems (MEMSs).Keywords
Funding Information
- National Natural Science Foundation of China (51875318)
- Huazhong University of Science and Technology (P2018-002)
- Shandong University (2017WLJH23)
- State Key Laboratory of Materials Processing and Die and Mould Technology
This publication has 53 references indexed in Scilit:
- The effects of gas counter pressure and mold temperature variation on the surface quality and morphology of the microcellular polystyrene foamsJournal of Applied Polymer Science, 2012
- The effects of extensional stresses on the foamability of polystyrene–talc composites blown with carbon dioxideChemical Engineering Science, 2012
- Mechanism of extensional stress-induced cell formation in polymeric foaming processes with the presence of nucleating agentsThe Journal of Supercritical Fluids, 2012
- Visual observation and numerical studies of N2 vs. CO2 foaming behavior in core‐back foam injection moldingPolymer Engineering & Science, 2011
- Influence of supramolecular additives on foam morphology of injection-molded i-PPJournal of Cellular Plastics, 2011
- Controlling Morphology of Injection Molded Structural Foams by Mold Design and Processing ParametersJournal of Cellular Plastics, 2007
- Applicability of the transient plane source method to measure the thermal conductivity of low‐density polyethylene foamsJournal of Polymer Science Part B: Polymer Physics, 2004
- Cell morphology and property relationships of microcellular foamed pvc/wood‐fiber compositesPolymer Engineering & Science, 1998
- Processing and characterization of microcellular foamed high‐density polythylene/isotactic polypropylene blendsPolymer Engineering & Science, 1998
- Solubilities of carbon dioxide and nitrogen in polystyrene under high temperature and pressureFluid Phase Equilibria, 1996