Control of the Preferred Orientation of Cu(In,Ga)Se2Thin Film by the Surface Modification of Mo Film
Authors:
- 1 January 2011
- journal article
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 159 (1) , B1-B5
Abstract
Orientation control of Cu(In,Ga)Se2 (CIGS) thin film could be critical to achieve conversion efficiency of CIGS solar cells that exceeds 20%. The preferred orientation of CIGS thin film is investigated here by modifying the surface of an underlying Mo film. The orientation and surface morphology of the Mo film were modified by varying the deposition pressure during the sputtering process. The Mo surface showed a (110)-preferred orientation at low deposition pressures and a (221)-preferred orientation at high deposition pressures. With a Se pretreatment at 400°C, a strong (002)-oriented MoSe2 layer was formed on the (110)-oriented Mo film and a randomly oriented MoSe2 layer was formed on the (221)-oriented Mo film. We found that a (112)-oriented CIGS film was grown on the (002)-oriented MoSe2 surface, while a (220)/(204)-oriented CIGS film was grown on the randomly oriented MoSe2 surface. The orientation of the MoSe2 layer that was dependent on the surface morphology of the Mo film played a role in determining the preferred orientation of the CIGS thin film. The sequential progress of the orientation development of Mo, MoSe2, (In,Ga)2Se3 and Cu(In,Ga)Se2 films in a three-stage co-evaporation process is examined and discussed.Keywords
This publication has 11 references indexed in Scilit:
- Effects of Se Flux on the Microstructure of Cu(In,Ga)Se[sub 2] Thin Film Deposited by a Three-Stage Co-evaporation ProcessElectrochemical and Solid-State Letters, 2006
- Formation and characterisation of MoSe2 for Cu(In,Ga)Se2 based solar cellsThin Solid Films, 2005
- Preferred Orientation Control of Cu(In1-xGax)Se2(x≈0.28) Thin Films and Its Influence on Solar Cell CharacteristicsJapanese Journal of Applied Physics, 2002
- Electrical properties of the Cu(In,Ga)Se2/ MoSe2/Mo structureSolar Energy Materials and Solar Cells, 2001
- Stability Issues of Cu(In,Ga)Se2-Based Solar CellsThe Journal of Physical Chemistry B, 2000
- Texture manipulation of CuInSe 2 thin filmsThin Solid Films, 2000
- Analysis of thin film stress measurement techniquesThin Solid Films, 1997
- Chemical and Structural Characterization of Cu(In,Ga)Se2/Mo Interface in Cu(In,Ga)Se2 Solar CellsJapanese Journal of Applied Physics, 1996
- Sputtered molybdenum bilayer back contact for copper indium diselenide-based polycrystalline thin-film solar cellsThin Solid Films, 1995
- Electronic structure of , , and . I. Band-structure calculations and photoelectron spectroscopyPhysical Review B, 1987