Sealing Behavior of Visco-Elastic Composite Seals for SOFC Applications
Authors:
- 1 August 2006
- journal article
- Published by Trans Tech Publications, Ltd. in Key Engineering Materials
- Vol. 317-318, 921
Abstract
Porous composites containing ceramic fiber have been developed for the fabrication of SOFC seals. They were fabricated using glass powder and alumino-silicate chopped fibers. Effect of mixing ratios of ceramic fiber and glass on the leak rates and strength of the composite seals was investigated. In addition, seal performance of commercial glasses was compared with that of SiO2-BaO-B2O3 glass synthesized in this work. The leak rate of the composite seals containing 55 vol% glass was seven times higher than the one containing 75 vol% glass. The flexural strength of the composite seals was reduced to one fourth of the initial value as the porosity increased from 1 to 29%. The incorporation of alumino-silicate chopped fibers into a sealing glass degraded room temperature strength and increased leak rates due to increase in porosity with increasing fiber content. The viscosity of glass at the seal test temperature is presumed to affect the leak rate of the glass seal.Keywords
This publication has 4 references indexed in Scilit:
- Alternative planar SOFC sealing conceptsFuel Cells Bulletin, 2004
- Ultra-low leak rate of hybrid compressive mica seals for solid oxide fuel cellsJournal of Power Sources, 2002
- Interphase effects on the bend strength and toughness of an oxide fibre/oxide matrix compositeCeramics International, 2002
- Glass-ceramic sealants for solid oxide fuel cells: Part I. Physical propertiesJournal of Materials Research, 1996