Combustion Phasing Indicators for Optimized Spark Timing Settings for Methane-Hydrogen Powered Small Size Engines
Authors:
- 29 March 2022
- conference paper
- Published by SAE International in SAE International Journal of Advances and Current Practices in Mobility
- Vol. 1
Abstract
In the intermediate stage towards zero-emissions, use of methane-hydrogen blends in spark ignition (SI) engines could represent an attractive application. The present work investigated the relevance of empirical base rules for choosing maximum brake torque spark timing settings when using methane-hydrogen blends. A 0D/1D model was used for investigating the optimized ignition for maximizing engine output. Calibration was performed by using in-cylinder pressure data recorded on a methane fueled small size SI engine for two-wheel applications. After adaptations of the model such as valves timing, for rendering it more representative for power generation applications, the investigation was focused on how MBT spark advance was correlated to the 50% mass fraction burned mark (CA50) and peak pressure location. The fact that they were optimized for methane was found to be essential only for high concentrations of hydrogen. Engine speed instead was found to exert an important influence on the optimal value of CA50. This is of relatively increased significance for the specific case of small SI engines that operate in a large range of crankshaft rotational speed.Keywords
This publication has 26 references indexed in Scilit:
- Spark Advance Modeling of Hydrogen-Fueled Spark Ignition Engines Using Combustion DescriptorsJournal of Engineering for Gas Turbines and Power, 2018
- Methane/hydrogen fueling a spark-ignition engine for studying NO, CO and HC emissions with a research CFD codeFuel, 2016
- Comparison of the renewable transportation fuels, hydrogen and methanol formed from hydrogen, with gasoline – Engine efficiency studyInternational Journal of Hydrogen Energy, 2012
- Conversion of a gasoline engine-generator set to a bi-fuel (hydrogen/gasoline) electronic fuel-injected power unitInternational Journal of Hydrogen Energy, 2011
- Derivation of burning velocities of premixed hydrogen/air flames at engine-relevant conditions using a single-cylinder compression machine with optical accessInternational Journal of Hydrogen Energy, 2010
- Hydrogen-fueled internal combustion enginesProgress in Energy and Combustion Science, 2009
- Numerical comparison of premixed laminar flame velocity of methane and wood syngasFuel, 2009
- Fuel economy and emissions evaluation of BMW Hydrogen 7 Mono-Fuel demonstration vehiclesInternational Journal of Hydrogen Energy, 2008
- A Comparison Between Combustion Phase Indicators for Optimal Spark TimingJournal of Engineering for Gas Turbines and Power, 2008
- Ford P2000 Hydrogen Engine Dynamometer DevelopmentSAE International Journal of Advances and Current Practices in Mobility, 2002