Mason Number Analysis of a Magnetorheological Fluid-Based Rotary Energy Absorber
- 2 December 2014
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Magnetics
- Vol. 50 (11) , 1-4
Abstract
Magnetorheological energy absorbers (MREAs) have been successfully deployed in occupant protection systems to protect against potentially injurious shock, crash, and blast loads. These MREAs operate at shear rates upward of 25 000 s-1, but magnetorheological fluids (MRFs) are typically characterized for shear rates up to 1000 s-1 in commercially available parallel counter-rotating disk rheometers. Because of the lack of availability of data at the required high shear rates, a Searle-type magnetorheometer (essentially a concentric cylinder rotating in a cup) was designed and fabricated at the University of Maryland. Using this magnetorheometer, two commercial MRFs were characterized over the shear rate range of 0-25 000 s-1. It is shown that the rheometer was successful in replicating available characterization data at low shear rate, as well as quantifying high shear rate behavior as a function of applied field. In addition, it was shown that the Bingham-plastic (BP) constitutive model is appropriate and successfully characterized the apparent viscosity versus shear rate behavior of the MRFs over this shear rate range. Experimental data demonstrate that an increase in field dependent yield stress can be realized over this entire shear rate range, so that MREAs can be designed using data taken with the magnetorheometer. Finally, the Mason number, which has been shown to be a useful nondimensional number at low shear rates, also provides a useful physical interpretation at high shear rates as well.Keywords
This publication has 9 references indexed in Scilit:
- Measurement of Magnetorheological Fluid Properties at Shear Rates of up to 25 000 s$^{-1}$IEEE Transactions on Magnetics, 2012
- BEHAVIOR OF MR FLUIDS AT HIGH SHEAR RATEInternational Journal of Modern Physics B, 2011
- Adaptive magnetorheological seat suspension for the expeditionary fighting vehicleJournal of Physics: Conference Series, 2009
- Semi-Active Magnetorheological Helicopter Crew Seat Suspension for Vibration IsolationJournal of Aircraft, 2008
- Mason numbers for magnetorheologyJournal of Rheology, 2007
- Constitutive models of electrorheological and magnetorheological fluids using viscometersSmart Materials and Structures, 2005
- Mitigation of biodynamic response to vibratory and blast-induced shock loads using magnetorheological seat suspensionsProceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 2005
- Properties and Applications of Commercial Magnetorheological FluidsJournal of Intelligent Material Systems and Structures, 1999
- Determination of the Shear Rates of Non-Newtonian Fluids from Rotational Viscometric Data. I. Concentric Cylinder ViscometerTransactions of the Society of Rheology, 1971