A Comparing Tribological Study of PBT and PBT with Aramid Fibers, for Block-on-Ring Dry Regime
- 1 October 2014
- journal article
- Published by Trans Tech Publications, Ltd. in Applied Mechanics and Materials
- Vol. 658, 283-288
Abstract
This paper presents a comparative study upon tribological behavior of polybutylene terephthalate (PBT) and a blend of PBT + This paper presents a comparative study upon tribological behavior of polybutylene terephthalate (PBT) and a blend of PBT + 10% aramid fibers, in dry regime. Some of the properties of PBT grade CRASTIN 6130 NC010®. The tested materials they were obtained by molding at ICEFS Savinesti Romania. The aramid fibers added into PBT were supplied by Teijin, and have an average length of 125 mm. Tests were done with the help of a block-on-ring tribotester. The tests parameters were: three normal forces (F = 5 N, F = 15 N and F = 30 N), three values of sliding speed (v = 0.25 m/s, v = 0.50 m/s and v = 0.75 m/s) and a sliding distance of L = 5000 m, in dry regime, each test characterized by (F, v, L) being done twice. The conclusion of this research was that adding short aramid fibers in PBT improves the wear resistance, but slightly increases the friction coefficient. Also, the recorded temperatures near the contact are higher for the blend with aramid fibers. SEM investigation revealed particular processes within superficial layers of polymeric blend.Keywords
This publication has 17 references indexed in Scilit:
- Poly(butylene terephthalate) Nanocomposites Containing Carbon Nanotube2011
- The wear and friction of polyamide 46 and polyamide 46/aramid-fibre composites in sliding–rolling contactWear, 2009
- Fundamental aspects and recent progress on wear/scratch damage in polymer nanocompositesMaterials Science and Engineering: R: Reports, 2009
- Effect of Aramid Fiber and ZnO Nanoparticles on Friction and Wear of PTFE Composites in Dry and LN2ConditionsTribology Transactions, 2008
- High performance nanocomposites for tribological applications: Preparation and characterizationMaterials Science and Engineering: A, 2008
- Tribology of Polymeric Nanocomposites2008
- Micromechanical properties of poly(butylene terephthalate) nanocomposites with single- and multi-walled carbon nanotubesComposite Interfaces, 2006
- Tribology of polymers: Adhesion, friction, wear, and mass-transferTribology International, 2005
- Effect of matrix morphology on the wear and friction behavior of alumina nanoparticle/poly(ethylene) terephthalate compositesWear, 2005
- Wear of polymersProceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 2002