Formation of highly conformal spinel lithium titanate thin films based on a novel three-step atomic layer deposition process
Authors:
- 18 April 2019
- journal article
- research article
- Published by American Vacuum Society in Journal of Vacuum Science & Technology A
- Vol. 37 (3) , 031508
Abstract
Lithium titanate (Li4Ti5O12) (LTO) has several promising properties with regard to energy storage. The most important is its low volume expansion during lithium (de-) intercalation enabling the material for complex three-dimensional battery anode designs. To employ this property at a small scale, e.g., for micro batteries (<100 nm active layer thickness), a highly conformal deposition process like atomic layer deposition (ALD) is needed. However, the ALD of lithium containing layers is quite ambitious. Particularly, thermally activated deposition of lithium containing layers with water as a coreactant is challenging due to the high reactivity and hygroscopic nature of many lithium compounds, e.g., lithium hydroxide. That is why a novel ALD process regime has been developed, which allows the deposition of highly conformal and single phase LTO layers with excellent step coverage and composition. The process uses two metalorganic precursors: one acting as lithium and another as a titanium source. In contrast to usual ALD processes, these two precursors are subsequently applied. The reactive pulse with water is applied after the two metal precursor pulses. In this work, this novel ALD process sequence has been introduced and successfully demonstrated on 200 mm wafers using standard industrial ALD equipment. The layers are transformed to single phase Li4Ti5O12 by rapid thermal processing as proven by crystal phase analysis. Elemental composition has been analyzed by time of flight secondary ion mass spectrometry and x-ray photoelectron spectroscopy (XPS). Results show that the amounts of contaminants like carbon and chlorine are below the detection limits of XPS. Also, a uniform element distribution and stoichiometry in good agreement with theoretical expectations for lithium titanate could be shown.Keywords
Funding Information
- Sächsische Aufbaubank (100245395)
This publication has 10 references indexed in Scilit:
- Continuous and Conformal Lithium Titanate Spinel Thin Films by Solid State ReactionJournal of the Electrochemical Society, 2018
- A review of lithium and non-lithium based solid state batteriesJournal of Power Sources, 2015
- Atomic Layer Deposition and in Situ Characterization of Ultraclean Lithium Oxide and Lithium HydroxideThe Journal of Physical Chemistry C, 2014
- Understanding the Zero-Strain Lithium Insertion Scheme of Li[Li1/3Ti5/3]O4: Structural Changes at Atomic Scale Clarified by Raman SpectroscopyThe Journal of Physical Chemistry C, 2014
- Silicon nanowire lithium-ion battery anodes with ALD deposited TiN coatings demonstrate a major improvement in cycling performanceJournal of Materials Chemistry A, 2013
- Atomic Layer Deposition of Li2O–Al2O3 Thin FilmsChemistry of Materials, 2011
- Atomic layer deposition of lithium containing thin filmsJournal of Materials Chemistry, 2009
- Atomic layer deposition of titanium nitride from TDMAT precursorMicroelectronic Engineering, 2009
- Dissolution nature of the lithium hydroxide by water moleculesThe Journal of Chemical Physics, 2005
- An examination of the surface decomposition chemistry of lithium niobate precursors under high vacuum conditionsJournal of Crystal Growth, 2000