Fabrication of BaZr0.1Ce0.7Y0.2O3 – δ ‐Based Proton‐Conducting Solid Oxide Fuel Cells Co‐Fired at 1,150 °C
Authors:
- 22 November 2010
- journal article
- research article
- Published by Wiley in Fuel Cells
- Vol. 10 (6) , 1108-1113
Abstract
Dense proton‐conducting BaZr0.1Ce0.7Y0.2O3 – δ (BZCY) electrolyte membranes were successfully fabricated on NiO–BZCY anode substrates at a low temperature of 1,150 °C via a combined co‐press and co‐firing process. To fabricate full cells, the LaSr3Co1.5Fe1.5O10 – δ–BZCY composite cathode layer was fixed to the electrolyte membrane by two means of one‐step co‐firing and two‐step co‐firing, respectively. The SEM results revealed that the cathode layer bonded more closely to the electrolyte membrane via the one‐step co‐firing process. Correspondingly, determined from the electrochemical impedance spectroscopy measured under open current conditions, the electrode polarisation and Ohmic resistances of the one‐step co‐fired cell were dramatically lower than the other one for its excellent interface adhesion. With humidified hydrogen (2% H2O) as the fuel and static air as the oxidant, the maximum power density of the one‐step co‐fired single cell achieved 328 mW cm–2 at 700 °C, showing a much better performance than that of the two‐step co‐fired single cell, which was 264 mW cm–2 at 700 °C.Keywords
This publication has 9 references indexed in Scilit:
- High performance proton-conducting solid oxide fuel cells with a stable Sm0.5Sr0.5Co3−δ–Ce0.8Sm0.2O2−δ composite cathodeJournal of Power Sources, 2010
- Proton-conducting solid oxide fuel cells prepared by a single step co-firing processJournal of Power Sources, 2009
- Indium as an ideal functional dopant for a proton-conducting solid oxide fuel cellInternational Journal of Hydrogen Energy, 2009
- A Novel Composite Cathode for Low‐Temperature SOFCs Based on Oxide Proton ConductorsAdvanced Materials, 2008
- Ba(Zr0.1Ce0.7Y0.2)O3–δ as an Electrolyte for Low‐Temperature Solid‐Oxide Fuel CellsAdvanced Materials, 2006
- LaSr3Fe3-yCoyO10-δ (0 ≤ y ≤ 1.5) Intergrowth Oxide Cathodes for Intermediate Temperature Solid Oxide Fuel CellsChemistry of Materials, 2006
- Stability of BaCeO3‐Based Proton Conductors in Water‐Containing AtmospheresJournal of the Electrochemical Society, 1999
- Chemical stability study of BaCe0.9Nd0.1O3−α high-temperature proton-conducting ceramicJournal of Materials Chemistry, 1997
- Rational selection of advanced solid electrolytes for intermediate temperature fuel cellsSolid State Ionics, 1992