CONVECTIVE HEAT TRANSFER IN A CHANNEL WITH POROUS BAFFLES
Authors:
- 1 September 2004
- journal article
- research article
- Published by Taylor & Francis in Numerical Heat Transfer, Part A: Applications
- Vol. 46 (5) , 425-452
Abstract
Laminar forced-convective heat transfer in a two-dimensional parallel-plate channel with 16 porous baffles mounted alternately on bottom and top walls was studied numerically. The numerical study was conducted by developing and using a finite-volume code. The pressure and velocity fields were linked by the SIMPLEC algorithm. The extended Darcy-Forchheimer model was used to describe resistance to flow through the porous baffles. The grid independence was established for the developed code. The code was validated against the studies by Sung et al. [ 7 Sung, H. J. , Kim, S. Y. and Hyun, J. M. 1995. Forced Convection from an Isolated Heat Source in a Channel with Porous Medium. Int. J. Heat Fluid Flow, vol. 16: pp. 527–535. [Google Scholar] ] and Nakayama [ 15 Nakayama, A. PC-Aided Numerical Heat Transfer and Convection Flow, pp. 243–247. Boca Raton, FL: CRC Press. [Google Scholar] ]. The parametric runs were made for Reynolds numbers (Re) of 100, 200, 300, and 400; for Darcy number (Da) values of 8.783 × 10−6, 1.309 × 10−5, and 1.791 × 10−5; for nondimensional baffle spacing values of (D∗)=11, 13, and 15; for nondimensional baffle aspect ratio (W∗) of 4, 6, and 12; thermal conductivity ratios (K∗) of 1, 10, and 100; and nondimensional baffle height (B∗) was fixed at 1/3. Consideration was given only to flow of air (Pr=0.7). It was found that heat transfer enhancement ratios for solid-baffle cases are higher than those for corresponding porous-baffle cases. The heat transfer enhancement ratio increased with increase in Re, decrease in Da, increase in K∗, increase in D∗, and decrease in W∗. The heat transfer enhancement per unit increase in pumping power was less than unity for the range of parameters considered in this study.Keywords
This publication has 13 references indexed in Scilit:
- Use of porous baffles to enhance heat transfer in a rectangular channelInternational Journal of Heat and Mass Transfer, 2003
- Calculation of turbulent flow and heat transfer in a porous-baffled channelInternational Journal of Heat and Mass Transfer, 2003
- Forced convection cooling enhancement by use of porous materialsInternational Journal of Heat and Fluid Flow, 1998
- Turbulent Heat Transfer and Fluid Flow in a Porous-Baffled ChannelJournal of Thermophysics and Heat Transfer, 1997
- Forced convection from an isolated heat source in a channel with porous mediumInternational Journal of Heat and Fluid Flow, 1995
- EFFECTS OF BOUNDARY CONDITIONS ON NON-DARCIAN HEAT TRANSFER THROUGH POROUS MEDIA AND EXPERIMENTAL COMPARISONSNumerical Heat Transfer, Part A: Applications, 1995
- Analysis of forced convection enhancement in a channel using porous blocksJournal of Thermophysics and Heat Transfer, 1994
- Analysis of Surface Enhancement by a Porous SubstrateJournal of Heat Transfer, 1990
- Conjugate heat transfer in a channel with staggered ribsInternational Journal of Heat and Mass Transfer, 1985
- Boundary and inertia effects on flow and heat transfer in porous mediaInternational Journal of Heat and Mass Transfer, 1981