Phase Distribution During Slag Formation in Mn Ferroalloy Production
Authors:
Open Access
- 6 February 2022
- journal article
- research article
- Published by Springer Nature in Metallurgical and Materials Transactions B
- Vol. 53 (2) , 1122-1135
Abstract
Phase development during slag formation and reduction of Comilog and Assmang ores in a setup that simulates the conditions in an industrial SAF process under different coke bed temperatures, 1473 K (1200 °C), 1673 K (1400 °C) and 1773 K, (1500 °C) was investigated. Graphite crucibles were utilized to contain the charge and as a heating element in an induction furnace. A temperature profile was established, cross-sectional excavations were made, and samples were core drilled at selected positions. The resultant phases, i.e., slag and metal, were examined in an electron probe microanalyzer (EPMA) coupled with wavelength-dispersive spectrometry (WDS). The equilibrium phase relations in the MnO–SiO2–CaO–MgO–Al2O3 oxide system were calculated using FactSage 7.3 thermochemical software. Differences in ore compositions revealed significant differences in phase development during slag formation and reduction behavior of these manganese sources. The phase development is highly influenced by temperature and position in relation to the coke bed, with a two-phase region, i.e., manganosite + liquid, dominant on top of the coke bed and a dominant liquid slag inside the coke bed. The solid monoxide phase in Comilog has been found to be purely MnO. In contrast to Comilog, the solid monoxide solution phase in Assmang has significantly high FeO content and forms a (Mn,Mg,Fe)O solid solution, which becomes more enriched in MgO with increases in temperature and reduction extent. Due to lower concentration of CO gas for prereduction in this experimental setup, iron oxides are reduced to FeO instead of Fe and subsequently FeO is stabilized in the monoxide solid solution.Keywords
Funding Information
- NTNU Norwegian University of Science and Technology
This publication has 13 references indexed in Scilit:
- Reprint of: FactSage thermochemical software and databases, 2010–2016Calphad, 2016
- Parameters Affecting Energy Consumption for Producing High Carbon Ferromanganese in a Closed Submerged Arc FurnaceJournal of Iron and Steel Research International, 2014
- Predicted effect of ore composition on slag formation in manganese ore reductionMineral Processing and Extractive Metallurgy: Transactions of the Institutions of Mining and Metallurgy: Section C, 2014
- Optimum condition for smelting high carbon ferromanganeseIronmaking & Steelmaking: Processes, Products and Applications, 2012
- Melting and Reduction of Manganese Sinter with Fluxes2012
- Kinetics and Mechanism of the Simultaneous Carbothermic Reduction of FeO and MnO from High-Carbon Ferromanganese SlagMetallurgical and Materials Transactions B, 2009
- Reduction Kinetics of MnO from High-Carbon Ferromanganese Slags by Carbonaceous Materials in Ar and CO AtmospheresMetallurgical and Materials Transactions B, 2008
- Prereduction of self-reducing pellets of manganese oreIronmaking & Steelmaking: Processes, Products and Applications, 2007
- Reduction of Siliceous Manganese Ore by Graphite.ISIJ International, 1995
- Kinetic model for the carbothermic reduction of manganese dioxideThermochimica Acta, 1988