Hydroxyapatite‐coated polyurethane for auricular cartilage replacement: An in vitro study
- 6 July 2007
- journal article
- research article
- Published by Wiley in Journal of Biomedical Materials Research Part A
- Vol. 84A (2) , 475-482
Abstract
Auricular reconstruction remains a major challenge facing reconstructive surgeons owing to the complexity of autogenous transplants. In this study, the development of a three‐dimensional custom‐made polyurethane (PU) auricular implant with hydroxyapatite (HA) coating is described. The PU implant was produced by computerized tomography (CT) scanning and indirect rapid prototyping. To improve the physiological response of the implant, the PU prototype was coated with a microrough, homogenous layer of HA by a novel solvent‐compression coating method. Bioactivity of the HA coated PU substrates was confirmed by apatite formation on the HA coating after 9 days in revised simulated body fluid (pH 7.4). Adhesion strength of the HA coating to the PU surface using the tensile pull‐off test revealed partial failure of the coating with an average tensile strength of 1.6 MPa. As an initial stage indication of cytocompatibility for a soft tissue application, in vitro cell culturing on the HA‐coated PU substrates using Graham 293 fibroblast cells was performed. After 24 and 72 h, the HA coated surfaces displayed significantly higher cell numbers and metabolically active cells compared with the virgin uncoated PU surfaces. This indicates that HA coated PU surfaces are cytocompatible towards fibroblasts and could potentially be applied to auricular cartilage tissue replacement. © 2007 Wiley Periodicals, Inc. J Biomed Mater Res, 2008Keywords
This publication has 17 references indexed in Scilit:
- Characteristics of tissue-engineered cartilage from human auricular chondrocytesBiomaterials, 2004
- Tissue engineering auricular reconstruction: in vitro and in vivo studiesBiomaterials, 2004
- Elastic cartilage engineering using novel scaffold architectures in combination with a biomimetic cell carrierBiomaterials, 2003
- Auricular Reconstruction for Microtia: Part II. Surgical TechniquesPlastic and Reconstructive Surgery, 2002
- Biomedical applications of polymer-composite materials: a reviewComposites Science and Technology, 2001
- Auricular Reconstruction: Indications for Autogenous and Prosthetic TechniquesPlastic and Reconstructive Surgery, 2001
- Revised Simulated Body FluidKey Engineering Materials, 2000
- Apatite formation on surfaces of ceramics, metals and polymers in body environmentActa Materialia, 1998
- Porous High-Density Polyethylene Implants in Auricular ReconstructionJAMA Otolaryngology–Head & Neck Surgery, 1997
- Heterotopic osteogenesis in porous ceramics induced by marrow cellsJournal of Orthopaedic Research, 1989